Directory: A-Z 

AAG Cloud Watcher

www.aagware.eu/aag_cloudwatcher700.htm

The AAG CloudWatcher, a high precision, low cost system for monitoring the sky condition. Installation indi_aagcloudwatcher is the INDI driver for the AAG CloudWatcher, a high precision, low cost system for monitoring the sky condition. To ...

Apogee CCD

Installation INDI Apogee driver supports all lines of Apogee CCDs. The driver is available for download as a 3rd party driver from INDI's download page. Under Ubuntu, you can install it via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-ge ...

Category:CCDs
Astro-Electronic FS-2

Installation lx200fs2 is included with INDI v0.8+. Features There are no extra features for this driver. Operation It only works with firmware versions 1.19 and higher, because needs to support ACK command. However versi ...

Category:Telescopes
ATIK CCD

www.cloudmakers.eu/indi

INDI driver for ATIK CCDs supports Atik Titan and Atik 3xx/4xx cameras with full cooler and guider port control and is compatible with INDI 0.9.9 on MacOS X, 32 and 64 bit Linux and Raspbian.

Category:CCDs
ATIK Filter Wheel v2

www.cloudmakers.eu/indi

INDI driver for ATIK supports EFW2 wheels and is compatible with INDI 0.9.7 on MacOS X, 32 and 64 bit Linux and Raspbian.

Category:Filter Wheels
Autostar

Installation lx200autostar is the generic driver for all Autostar based telescopes. Almost all other Meade drivers are derived from the Autostar driver. You can use the lx200autostar driver with any of the ETX, LX50, LX90, or LX200 series telescopes ...

Category:Meade
Celestron NexStar

Installation indi_celestron_gps in included with libindi by default. Features The Celestron Nextstar supports all GOTO functions. Operation You might encounter connection problems with the driver using Serial to USB c ...

Category:Celestron
EQ-6 MCU Update

Installation lx200basic is included with INDI v0.6+ Features The LX200 Basic supports most functions of the EQ-6 MCU Update: Project Website Project Support and Community Operation It works with all fir ...

Category:Telescopes
EQMod

www.indlib.org

Installation INDI EQMod Driver is released as a 3rd party driver and requires INDI Library >= v0.9.7. To Install the driver under Ubuntu: sudo apt-add-repository ppa:mutlaqja/ppa sudo apt-get update && sudo apt-get install indi-eqmod ...

Category:Telescopes
FLI CCD & Filter Wheel

Installation INDI Finger Lakes Instruments (FLI) CCD & Filter Wheel driver is available for download as a 3rd party driver from INDI's download page. Under Ubuntu, you can install it via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-get u ...

Category:CCDs
GPhoto (DSLR Cameras)

Installation INDI can control any camera supported by GPhoto using the gphoto driver. This includes most DSLRs cameras. Make sure the OS does not mount the camera as a disk-drive. INDI should be able to support any camera supported by libgpho ...

Category:CCDs
GPUSB

Installation INDI GPUSB driver is included with libindi v0.9.6+ Features Provides basic auto guiding interface. Operation Usually the user doesn't control this device directly, but instead uses a client software (such a ...

Category:Auxiliary
HEQ-5 MCU Update

Installation lx200basic is included with INDI v0.6+. Features The LX200 Basic supports most functions of the HEQ-5 MCU Update: Project Website Project Support and Community Operation It works with all fi ...

Category:Telescopes
IEA30,iEQ45 and  IEQ75

www.ioptron.com/index.cfm?select=productdetails&phid=a67ad03

Installation Included with libindi v0.9+ Features Basic functions. Slew, sync. track rate Operation IOptron telescope drivers are relate to Hand Controller (HC) version, not to telescope model. Same driver cover ieq30,ieq45 and ...

Category:IOptron
Imaging Source CCD

www.theimagingsource.com

Installation INDI can control Imaging Source DMK CCDs via the Video4Linux driver. This includes support for long exposures in addition to video streaming. DMK CCDs are supported in INDI library v0.9.8 or later. Under Ubuntu, you can install t ...

Category:CCDs
JMI MOTOFOCUS

Installation lx200classic and lx200autostar are included with INDI v0.2+. You can use either driver to control the focuser. Your results may vary, the Motofocus might not move on the lowest speed setting. You should try both drivers to see which ...

Category:Focusers
Joysticks

INDI (v >= 0.9.7) supports game pads under Linux for input control. The INDI joystick driver (indi_joystick) queries the controller and provide the following properties: Joysticks: Each joystick displays a normalized magnitude [0 to 1] and an angle. Th ...

Category:Controllers
LittleFoot Elegance Photo

Installation lx200basic is included with INDI v0.6+. Features The LX200 Basic supports basic functions of the LFE Photo: Project Website Project Support and Community Operation It works with all firmw ...

Category:Telescopes
LittleFoot Vpower

Installation lx200basic is included with INDI v0.6+ Features The LX200 Basic supports basic functions of the LittleFoot Vpower: Project Website Project Support and Community Operation It works with all f ...

Category:Telescopes
LX200 16

Installation TODO Features TODO Operation TODO Issues There are no known bugs for this driver. If you found a bug, please report it at INDI's bug tracking system at SourceForge. (You can log in with a vari ...

Category:Meade

Subscribe to INDI

SUBSCRIBE TO THE NEWSLETTER
NEWSLETTER
NAME
EMAIL{emailcloak=off}
 

3rd Party

Choose from the numerous 3rd party INDI drivers to suit your needs!

Got Problem?

Check out the FAQ, the forum, and the bug tracking system to resolve any issues you might have!
You can also subscribe to INDI newsletter and development mailing lists to get the latest updates on INDI!