Installation INDI can control Imaging Source DMK CCDs via the Video4Linux driver. This includes support for long exposures in addition to video streaming. DMK CCDs are supported in INDI library v0.9.8 or later. Under Ubuntu, you can install the ...
indilib.org/develop/indiforjava/i4jdrivers/raspberry-pi-gpio
Raspberry Pi is an ARM based, credit card sized computer. In addition to the usual computer features, it has two GPIO ports with a total number of 21 pins that can be set (on / off) or read. Moreover, one of those pins can be used as a PWM output. Thus, i ...
Installation lx200classic and lx200autostar are included with INDI v0.2+. You can use either driver to control the focuser. Your results may vary, the Motofocus might not move on the lowest speed setting. You should try both drivers to see which g ...
Installation Baader SteelDrive driver is included with libindi >= 0.9.9. Under Ubuntu, you can install the driver via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-get update sudo apt-get install libindi1 Features The JMI Sm ...
INDI (v >= 0.9.7) supports game pads under Linux for input control. The INDI joystick driver (indi_joystick) queries the controller and provide the following properties: Joysticks: Each joystick displays a normalized magnitude [0 to 1] and an angle. Th ...
Installation Lacerta MFOC driver is included with libindi >= 1.7.6 Under Ubuntu, you can install the driver via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-get update sudo apt-get install libindi1 Features The LACERTA Motorfo ...
Installation INDI Lacerta MGEN driver is available for download as a 3rd party driver from INDI's download page. Under Ubuntu, you can install it via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-get update sudo apt-get install indi-mgen Featu ...
Installation lx200basic is included with INDI v0.6+. Features The LX200 Basic supports basic functions of the LFE Photo: Project Website Project Support and Community Operation It works with all firmware ve ...
Installation lx200basic is included with INDI v0.6+ Features The LX200 Basic supports basic functions of the LittleFoot Vpower: Project Website Project Support and Community Operation It works with all firmwar ...
Installation INDI Gemini/Gemini2 Driver is is included by default with INDI Library v1.0+. Under Ubuntu, you can install it via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-get update sudo apt-get install indi-bin Features This driver contro ...
Installation Nexdome Beaver driver is included with libindi >= 1.9.4 Under Ubuntu, you can install the driver via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-get update sudo apt-get install libindi1 This package provides the INDI ...
Installation lx200classic is included with INDI v0.2+ Features The lx200classic supports functions that were removed with the introduction of Autostar: Ability to read object name from controller. Setting Max Slew Rate. ...