×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Inova CCD

  • Posts: 22
  • Thank you received: 0

Replied by Revellat on topic Inova CCD

Hello,

Today i try one time more time i.nova driver. Changing exposure time, gain and black level has no effect. The captured image remain the same (see attachment).

Yes the i.Nova driver is included into INDI but it is not usable :
- Setting the time exposure command has no effect : An image is captured, but the time exposure do not change,
- the gain command has no effect,
- the black level command has no effect,
- the image is not correct (divided in two parts).
6 years 5 months ago #20441
Attachments:
The topic has been locked.
  • Posts: 106
  • Thank you received: 7

Replied by Thomas Jäger on topic Inova CCD

Hi Forum,
today I tried my I-Nova PLA-MX mono to work with INDI with no success.
The driver crashed immidiately, see log. Is there a solution? My ASI and Moravian
work fine. I use Linux Mint 18.2 with recent INDI System (PPA).

Thomas
6 years 3 months ago #21831
Attachments:
The topic has been locked.

Replied by Jasem Mutlaq on topic Inova CCD

Please try to update again, there was build problem yesterday that was only solved 6 hours ago.
The following user(s) said Thank You: Thomas Jäger
6 years 3 months ago #21839
The topic has been locked.
  • Posts: 106
  • Thank you received: 7

Replied by Thomas Jäger on topic Inova CCD

Hello Jasem,
thanks for your reply. I have updated my system now and the situation is unchanged.
Any hints or should I forget this cam.
Thomas
6 years 3 months ago #21842
Attachments:
The topic has been locked.

Replied by Jasem Mutlaq on topic Inova CCD

This is not a problem with the camera, it's related to some build issue with cfitsio. I have Mint on a VM so I am currently investigating the issue. THank you for your patience.
6 years 3 months ago #21843
The topic has been locked.
  • Posts: 106
  • Thank you received: 7

Replied by Thomas Jäger on topic Inova CCD

Hello Jasem, oh you are online. Sending many greetings to Kuwait. My issue with the iNova has very low priority.
Thomas
6 years 3 months ago #21844
The topic has been locked.

Replied by Jasem Mutlaq on topic Inova CCD

I'm on 18.1 and I don't see any issues. and now I am upgrading to 18.3 to see if there are any issues. Please run this and paste the output:
sudo apt-get update && sudo apt-get install indi-inovaplx
6 years 3 months ago #21845
The topic has been locked.

Replied by Jasem Mutlaq on topic Inova CCD

No issues with cfitsio in 18.3 either. Please run the command in the prior post and post the output then.
6 years 3 months ago #21846
The topic has been locked.
  • Posts: 106
  • Thank you received: 7

Replied by Thomas Jäger on topic Inova CCD

Hello Jasem,
here is the log.
Your install command whats to overwrite libinovasdk which is in the packet indi-inova-ccd 1.3.0.
Should I deinstall indi-inova-ccd first?
Thomas
6 years 3 months ago #21851
Attachments:
The topic has been locked.

Replied by Jasem Mutlaq on topic Inova CCD

Try running this:
sudo apt-get -o Dpkg::Options::="--force-overwrite" install -f
6 years 3 months ago #21852
The topic has been locked.
  • Posts: 106
  • Thank you received: 7

Replied by Thomas Jäger on topic Inova CCD

Hello Jasem,
I have deinstalled the indi-inova-ccd 1.3.0 and successfully issued
your commands:
sudo apt-get update &&
sudo apt-get install indi-inovaplx

now the cam works. Thanks very much.
Does indi-inovaplx replace the old driver?
6 years 3 months ago #21854
The topic has been locked.

Replied by Jasem Mutlaq on topic Inova CCD

yes, do not use the older driver again.
6 years 3 months ago #21855
The topic has been locked.
Time to create page: 0.580 seconds