×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Datyson T7M

  • Posts: 53
  • Thank you received: 0

Replied by Chris on topic Datyson T7M

I did connected the cam via powered hub and did the update of indi yesterday with latest.
But I didn’t flashed the firmware. Where can I find instructions for that?

Will try in Windows quickly.

Chris
SW Quattro CF 8" F4 - Canon 60DAW -Canon FD200mm F2.8 - allccd5v mono - Datyson T7M - iEQ45 8407 & iEQ45 8406 - RPi 3b ekos+kstars - LattePanda W10
6 years 3 months ago #21432

Please Log in or Create an account to join the conversation.

  • Posts: 486
  • Thank you received: 87

Replied by nMAC on topic Datyson T7M

You can find it at ZWO page:

astronomy-imaging-camera.com/software/
on the SDK & Upgrade tool tab, there is software for windows and linux.
regards

nMAC
Last edit: 6 years 3 months ago by nMAC.
6 years 3 months ago #21443

Please Log in or Create an account to join the conversation.

  • Posts: 53
  • Thank you received: 0

Replied by Chris on topic Datyson T7M

Thanks nMAC.
Any idea which version to use? I see ASI120MM.iic & ASI120MM-compatible.iic?
SW Quattro CF 8" F4 - Canon 60DAW -Canon FD200mm F2.8 - allccd5v mono - Datyson T7M - iEQ45 8407 & iEQ45 8406 - RPi 3b ekos+kstars - LattePanda W10
6 years 3 months ago #21468

Please Log in or Create an account to join the conversation.

  • Posts: 90
  • Thank you received: 37

Replied by Csaba Kertesz on topic Datyson T7M

ASI120MM-compatible.iic
6 years 3 months ago #21469

Please Log in or Create an account to join the conversation.

  • Posts: 53
  • Thank you received: 0

Replied by Chris on topic Datyson T7M

Thnx!
SW Quattro CF 8" F4 - Canon 60DAW -Canon FD200mm F2.8 - allccd5v mono - Datyson T7M - iEQ45 8407 & iEQ45 8406 - RPi 3b ekos+kstars - LattePanda W10
6 years 3 months ago #21470

Please Log in or Create an account to join the conversation.

  • Posts: 53
  • Thank you received: 0

Replied by Chris on topic Datyson T7M

flashed the firmware and now the cam is working on rpi both ekos and phd. its also working on windows phd2.
The only problem now is that the screen is constantly a bit messed up. See pictures attached.

didnt had time to test st4 port yet.. will do this soon.
SW Quattro CF 8" F4 - Canon 60DAW -Canon FD200mm F2.8 - allccd5v mono - Datyson T7M - iEQ45 8407 & iEQ45 8406 - RPi 3b ekos+kstars - LattePanda W10
6 years 3 months ago #21485
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 486
  • Thank you received: 87

Replied by nMAC on topic Datyson T7M

Good to know it's already working. You are showing live video on attachments, live video does not work well with this cameras because
it's very demanding on USB2. Is it happening on still capture too? Leave USB bandwidth manually at the value "40". Do not leave it in auto mode.

Regards.
6 years 3 months ago #21494

Please Log in or Create an account to join the conversation.

  • Posts: 53
  • Thank you received: 0

Replied by Chris on topic Datyson T7M

this is happening on still capture too.
bandwith is set to 40 in the controls tab.
It's not constantly.. but happens often.

Didn't used the cd that came with the camera? Can't imagine I should, but do I need to install somethinh additiona as well?
SW Quattro CF 8" F4 - Canon 60DAW -Canon FD200mm F2.8 - allccd5v mono - Datyson T7M - iEQ45 8407 & iEQ45 8406 - RPi 3b ekos+kstars - LattePanda W10
6 years 3 months ago #21504

Please Log in or Create an account to join the conversation.

  • Posts: 486
  • Thank you received: 87

Replied by nMAC on topic Datyson T7M

Hi,

I had that problem too on RPi, it's usb bus is sensible to some devices, even with a powered hub.
I gave up on RPi on my primary setup and now I am using the camera on x86_64 PC with an Atom Processor and I don't have those problems. The same happened with my SSAG.I didn't use the cd at all. I only flashed the compatible firmware from ZWO website and started using it with INDI.
One other note, just verify if the camera is working at 8bit mode! Don't use 16bit it will mess up the images too.
Last edit: 6 years 3 months ago by nMAC.
6 years 3 months ago #21508

Please Log in or Create an account to join the conversation.

  • Posts: 53
  • Thank you received: 0

Replied by Chris on topic Datyson T7M

I bought the cam especially for the rpi for guiding :).
The QHY5 that doesn't work on rpi is perfectly working under windows.

I think the problem will not be that big when using the cam with PHD2 and a interval of > 1s ..
8bit mode is on. Will update here soon if I tested it at night :).
SW Quattro CF 8" F4 - Canon 60DAW -Canon FD200mm F2.8 - allccd5v mono - Datyson T7M - iEQ45 8407 & iEQ45 8406 - RPi 3b ekos+kstars - LattePanda W10
6 years 3 months ago #21525

Please Log in or Create an account to join the conversation.

  • Posts: 486
  • Thank you received: 87

Replied by nMAC on topic Datyson T7M

One last note, I generally find that 2x2 bin works better than 1x1. I does not hang so often.
Also try to keep the exposure >=1s like you said. I use 1s and works fine. Less than 1s is too fast if you are using it with client-server topology.
RPi USB can't cope with that.
Last edit: 6 years 3 months ago by nMAC.
6 years 3 months ago #21550

Please Log in or Create an account to join the conversation.

  • Posts: 53
  • Thank you received: 0

Replied by Chris on topic Datyson T7M

thanks, need some time to test it :)
any idea how to mount this cam to a simple finderscope 8x50?
SW Quattro CF 8" F4 - Canon 60DAW -Canon FD200mm F2.8 - allccd5v mono - Datyson T7M - iEQ45 8407 & iEQ45 8406 - RPi 3b ekos+kstars - LattePanda W10
6 years 3 months ago #21656

Please Log in or Create an account to join the conversation.

Time to create page: 0.290 seconds