If you are using ppa:mutlaqja/ppa you may need to wait a couple of hours until it gets rebuild and then reinstall. If you are building it from source, you can checkout and rebuild it anytime. Peter
dmesg shows this when the Orion SSAG is plugged in
[ 718.676226] usb 1-3: new high-speed USB device number 5 using ehci-pci
[ 718.808489] usb 1-3: New USB device found, idVendor=1856, idProduct=0011
[ 718.808509] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
lsusb gives
Bus 001 Device 002: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 001 Device 005: ID 1856:0011
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I hope this is of some help.
Let me know if there is anything other info I can give you.