Thanks for the video.
After a complete new installation of Kubuntu (yes i googled that and installed it as a dualboot system for testing purposes) i managed, not without problems with picture size, to get the cam looping in bin 1X1.
Saved this configuration now, but can not test tonight because of bad weather.
Managed to keep the cam working in KStars, but no way to connect stable to PHD2 unfortunately.
There must be something i am doing wrong all the time...
Restarted all the software. Going to camera Tab, looping. No response. Its frustrating...
Found out that in this cases i have to delete the camera settings with the clear camera configuration button. This way i manage to loop in KStars again...
Found out that this does NOT help all the time... only sometimes...
I´m giving up now. There is no way to work for me like this...
I´ll provide a log here, i set up for the last minutes. No idea whats the problem.
Niki
EDIT:
Had a Testrun on 3 Systems today. Alway exactly the same Setup.
EQM-35 Mount connected via Pegasus Astro EQ-Direct Cable, direct to USB
Lodestar X2 also direct to USB
The Systems were:
1: Stellarmate with version 3.4.2
2: ASUS Vivobokk running 3.4.3
3: Macbook Air running 3.4.3
Absolute identical behavior on all 3 systems.
1sec Loop in Capturemodule runs with Bin 2X2 flawless
The same with bin 1X1 caused the cam to stop looping without any error message.
17 Frames on Stellarmate
12 Frames on ASUS Vivobook
7 Frames on Macbook Air
Either the cam has a problem what i do not believe, or there must be something with the driver, because its the only thing thats the same on all three systems...