×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Scheduler restarting services

  • Posts: 365
  • Thank you received: 32
Ok, so I now see that the scheduler is just waiting for the solver, which seems to have a problem with Go-To.

2016-04-19T23:10:13 Slewing to target coordinates: RA (13h 32m 05s) DEC ( 47° 06' 44").
2016-04-19T23:10:13 Syncing to RA (13h 36m 06s) DEC ( 46° 51' 51") is successful.
2016-04-19T23:10:13 Target is within 1° 02' 13" degrees of solution coordinates.

That seems fine, but it never gives a ¨complete¨ signal it seems.
7 years 11 months ago #7873

Please Log in or Create an account to join the conversation.

  • Posts: 365
  • Thank you received: 32
I'm suspecting a cabling issue now. Yesterday I switched my PI's power cable to get input from my powered USB hub (as adviced in the manual) and put all accessories in the HUB, except for the mount which is still in the PI itself (I couldn't get the right port when connecting that in the hub). The mount was having some issues with executing commands sometimes, so it might be related to that. Everything else just worked straight away as opposed to previous sessions, so I might be onto a solution for all my nagging and spamming here. ;)
7 years 11 months ago #7882

Please Log in or Create an account to join the conversation.

  • Posts: 365
  • Thank you received: 32
Ok, all seems fine now. One issue still that I can't get my head around. I schedule jobs and want them to start at a certain time. Lead time is 5 minutes, everything is scheduled and the scheduler is sleeping. But at the time it should start, nothing happens, I always need to make it force to start. No message is given as to why this would be... any suggestions?
7 years 11 months ago #7904

Please Log in or Create an account to join the conversation.

Email your .esl and .seq files and let me check
7 years 11 months ago #7906

Please Log in or Create an account to join the conversation.

  • Posts: 365
  • Thank you received: 32
Ok, everything working now, I did notice that it only starts properly when I´ve shut EKOS down and let the scheduler to start it up.
7 years 11 months ago #7907

Please Log in or Create an account to join the conversation.

Time to create page: 0.214 seconds