×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

I would like to use C mount lens with PLATE SOLVER.

  • Posts: 447
  • Thank you received: 30
Since the lower limit value of the confocal distance of the telescope and the guide scope is set on the Ekos setting screen, C mount lens can not be used with PLATE SOLVER.
Is it possible to change the lower limit to 20 mm?
7 years 3 months ago #13149

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
When the focal length of the C mount lens becomes effective, the viewfinder can be replaced.
(In the setting of the current focal length, it can only be used as a guide.)
7 years 3 months ago #13150

Please Log in or Create an account to join the conversation.

I'm sorry I don't follow? You're talking about setting focal length for guide scope?
7 years 3 months ago #13151

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
I would like to solve it as an electronic viewfinder using C mount lens, but it can not be realized because it can register only the setting of focal length 100 mm or more.
In the case of the electronic viewfinder, a focal length of about 25 to 50 mm is suitable, so I want you to realize it with Ekos.
7 years 3 months ago #13181
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
All Skyplate solvers, you can run a plate solver with a 35 mm C mount lens.
But I want to realize with Ekos.
7 years 3 months ago #13182
Attachments:

Please Log in or Create an account to join the conversation.

Ok done, it should be reflected in the next PPA update tomorrow.
The following user(s) said Thank You: T-Studio
7 years 3 months ago #13229

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
Mr knro
I upgraded quickly.
But there is a problem.
1. When checking with the telescope simulator, it is the same as the previous symptom.
It is not possible to set the focal length within 100 mm from the focal length.

2. When previewing with Ekos, the CCD driver crashes.

Both will not work correctly, please check.
7 years 3 months ago #13249
Attachments:

Please Log in or Create an account to join the conversation.

The PPA was built 7 hours ago and your message was posted 9 hours ago so you didn't get the latest ones yet. If you update now it should have the fix.
Last edit: 7 years 3 months ago by Jasem Mutlaq.
7 years 3 months ago #13262

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30

Replied by T-Studio on topic Another talk about INDI

I updated it.
But the same symptoms...
7 years 3 months ago #13275

Please Log in or Create an account to join the conversation.

Then it was not updated properly. Try:
sudo apt-get update && sudo apt-get -y dist-upgrade
The following user(s) said Thank You: T-Studio
Last edit: 7 years 3 months ago by Jasem Mutlaq.
7 years 3 months ago #13282

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30

Replied by T-Studio on topic Another talk about INDI

Again the focal length can not be changed.
Capture crash has been resolved.
7 years 3 months ago #13285
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30

Replied by T-Studio on topic Another talk about INDI

I confirmed it on another machine.
This works well.
The installed version differs from the installation status of the machine that does not work.
A machine that installation can not do well,
It is ubuntu 15.10.
7 years 3 months ago #13287
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 1.049 seconds