Hi,

I could not test the update due to bad weather. I hope to do it tonight.

Thanks,
Olivier

Hi,

Tonight, I was able to test the calibrating an guiding after doing the update of Indilib, and it's worse than last week. The guiding is aborting at any time. Sometimes after 10s, sometimes after a minute. It's very randomly.
It never finished the first capture (120s) of a sequence nor just a preview when the guiding is launch and that then that one is aborting.
I tried differents exposures 0.3, 0.5, 0.7, 1, 1.5, 2, bin2x2, with or without subframe, with or without dark, box size : 64, 128, pulse : 1000, 1500, 2000.

Thanks for your help,
Olivier

Is it same issue (timeout) in guide capture or something else? logs?

It seems that yes, I read often the same message while calibrating and guiding :It's Ok for polar alignment and astrometry solver.

Have you tried a USB hub rather than have your three USB devices directly connected to the Rpi?

The Rpi has limited milliampere shared between the four USB ports. It's about 1.2Ma I think. A decent 3A USB hub overcomes a lot of worries.

Hi,

Yes I've tried a USB hub tonight and there is the same problem, or a bigger problem : now it can't finish the calibrating after this message : Guide RA: Scope cannot reach the start point after 30 iterations. Possible mount or drive problems (with and without hub).
On the other hand when I'm using EKOS directly on Raspberry without going through the Mac as a remote, everything works. Not practical to work on a 7 "...

Olivier

Sounds like Jasem fixed the issue, but we will need a new dmg with the changes to fix it on Mac. I will do that in the next day or two. Right now I am in the middle of getting the one-click astrometry.net index file downloads that I made work for the Mac last week work for Linux as well. Should be soon.

Also, I agree, your initial post had some awesome graphics!

I was able to set up with the latest fixes, and am happy to report that internal guiding worked for me without aborting, for the first time.

Thank you for all your work

@knro
I also have problem with internal guide ( this problem is occurred from 2 week ? ..before it was okay ( i have make photo from 29 May very very good with 600 seconds exposure ), what is changed? )
Not have log only my remember experience, "Exposure timeout. Restarting exposure" and also "aborting guide"
All in random time, i use Meade DSI for guide in my finder ( 9x50 Celestron ) ..i repeat time ago all work ok ..now have this problem.

This night, if possible, making log. Bye, thanks.

Ok I have make one perfect night, all guiding worked ok ..10 minutes continuous of guide ok. Why this difference from one night to another? .not have idea i only change language from italian to english ( for make error log ), better so, i remain in english.

Only one time kstars closed itself when i close window of preview image captured.

Thanks, bye.