hello Jasem,
I upgraded to latest versions on server and client and can see indi-sx is 1.12-20180203 for example.
But I still cannot select 'skysensor' using the 'via' field in the EKOS guider options, it remains as just one choice 'SX CCD Lodestar'.
I assume that I should be able to choose to guide via RS232 or ST4 right?
I see Skysensor is online and I can use INDI control panel to Motion Control the scope so the RS232 is working.
Let me know if you need some logs.
Andrew
You're right I just checked and there was _another_ issue which I just fixed. I tested it now and I can see it in the guide module "via". So wait for tomorrow PPA update and check it out.
Just to reconfirm that all working fine - first time use of internal guide 'via' lodestar worked all night.
Option Via skysensor also available , I'll test tomorrow.
Thanks, so the issue was in the INDI driver and is now fixed. Though be aware that FS2 does not support pulse guiding, but it uses the older less reliable method for guiding so it's not as good.