×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Experiencing scheduler problems since 2.9.4

  • Posts: 40
  • Thank you received: 3
Hi everyone,

I'm experiencing some issues since I upgrade to kstars 2.9.4.
I use the scheduler to perform my imaging sequences, here is how it's set up :
I set the target and give a fits file for alignment ;
I checked the steps : Track, Focus, Align and Guide
I gave a sequence file.

When the scheduler is launched every thing works fine until it try to start the imaging sequence. The imaging sequence don't start ant send me this message :
Manual scheduled focusing is not supported. Run Autofocus process before trying again.
In the sequence I checked : "Guiding deviation <" ; "autofocus if HFR >" ; "Refocus every" and "Meridian flip if Ha >"
If I manually launch an autofocus then I can start the sequence (but an autofocus was already done by the scheduler...).

So I tried to upgrade Kstars to 2.9.5 and indi to 1.7.1. And, well, it's getting worse, now, even if I launch an autofocus manually the sequence don't start sending me the same message as before. The only way I found is to unchecked the autofocus boxes in the sequence parameters...

I think I missed something... :)

Regards,

Davy
The following user(s) said Thank You: Jasem Mutlaq
5 years 11 months ago #25242
Attachments:

Please Log in or Create an account to join the conversation.

Fixed in GIT, should be in 2.9.5 when officially released.
The following user(s) said Thank You: Davy HUBERT
5 years 11 months ago #25266

Please Log in or Create an account to join the conversation.

  • Posts: 40
  • Thank you received: 3
Thank you Jasem :) .
Does it means that I could have the fix if I use your nightly ppa ?

Regards,
Davy
5 years 11 months ago #25270

Please Log in or Create an account to join the conversation.

The following user(s) said Thank You: Davy HUBERT
5 years 11 months ago #25273

Please Log in or Create an account to join the conversation.

  • Posts: 40
  • Thank you received: 3
Thank you ! I'll do that :)
5 years 11 months ago #25277

Please Log in or Create an account to join the conversation.

  • Posts: 40
  • Thank you received: 3
Hi,
I installed the nightly version and the problem is solved.
Thank you Jasem ! :)
I'll open a different post to discuss about a strange behaviour that noticed with my SX cameras.

Regards,
Davy
5 years 11 months ago #25365

Please Log in or Create an account to join the conversation.

Time to create page: 0.274 seconds