×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Found some issues on fli ccd

  • Posts: 4
  • Thank you received: 1
Hi,support
I've found some issues wth fli ccd:
(1) fli ccd on k908 mini pc issue
i found there were one black edge on the every picture,and i make sure that is takes up the active pixels.







(2)fli ccd on the VM box issue
I can connet with fli ccd successfull but could not view the picture on pop-up fitview windows after expose. the logs as below:FLISetExposureTime()FAILED.Invalid argument









thanks
The following user(s) said Thank You: Joshua
Last edit: 9 years 6 months ago by jxskyinfo.
9 years 6 months ago #1905

Please Log in or Create an account to join the conversation.

  • Posts: 94
  • Thank you received: 38

Replied by max on topic Found some issues on fli ccd

the "k908 mini pc" is a arm mini pc with RK3188, and running my tinyastro debian linux.
Is this cause by the difference of kernel version ? Tinyastro use a 3.0.36 linux kernel.
9 years 6 months ago #1907

Please Log in or Create an account to join the conversation.

  • Posts: 94
  • Thank you received: 38

Replied by max on topic Found some issues on fli ccd

Hi @knro ,do you have any idea of the failure on fli camera ?
9 years 6 months ago #1923

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 1
I am very focused on the question 1 : black edge in the picture.
9 years 6 months ago #1924

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 1
9 years 6 months ago #1960

Please Log in or Create an account to join the conversation.

I contacted FLI since it is really hard to diagnose such issues without access to the camera to test. I asked for a "loaner" and they said they are looking for it. If anyone feels like sending me their FLI temporarily to get this sorted out, please contact me.
9 years 6 months ago #1970

Please Log in or Create an account to join the conversation.

Time to create page: 0.833 seconds