In the latest build the tab for Guiding in the Ekos Panel is missing.

It is only the case if I'm using a remote server. My setup is eqmod, gphoto and sx.

My device names are indi_eqmod_telescope, indi_gphoto_ccd and indi_sx_ccd

I also get the error message

"Unable to completely establish remote devices. 3 devices remaining. Please ensure remote device name corresponds to actual device name."

But I can use the mount, and take pictures with both SX and my Canon so except from the missing Guide tab everything seems to work...

If I use simulators remotely the problem is the same.

If I use simulators locally the Guide Tab is there.

/steen

indi_eqmod_telescope is not the device name, but the driver executable. You need to put "EQMod Mount", "GPhoto CCD" and "SX CCD LodeStar" respectively... but I think now that enough people got confused about this, I will change the whole approach for remote devices.

Ok, I reworked the remote devices selection, you can now select them as you would with local devices. The driver names in the Ekos options will be added the list to select from if needed. This will hopefully remove any confusion associated with remote drivers.

Thanks, that did the trick!

The tab is still missing for me.
Noticed it when testing the new DSI driver.
I use 'Meade DSI Pro (I/II)' as device name, and it connects correctly, but the guiding tab still doesn't show up.

Using the new version of KStars suggests the device name is simply 'DSI', but when using that the camera can't be found.

There is an issue with the naming of the Meade DSI.. I'll handle that when Ben is done from updating the DSI driver for color cameras.

The guide tab is missing in my setup to. Is there an issue with QHY5II-mono too? The program reports that the guider ports are ready and the QHY camera is online.

Maybe because QHY broke their QHY library last week and still haven't fixed it yet.