Hi,
I am not using eqtooth, but use a DIY similiar solution with my HEQ5.
Does the eqtooth comm port get detected on operating system? Wich one are you using (Linux?).
If so, mine usually shows as an rfcomm0 port. You should have at least one port with similiar name on /dev folder.
Did pair it with the receiver?
Hi ,
Thank you for your answer. it is under Ubuntu mate , I have the rfcomm0 port. and i have one port with similiar name on /dev folder.
How do you pair it with the receiver ?
Ok, so if you have the port showing that's good, it's detected by linux.
First check if you have bluetoothctl installed, normally it is. If not you should install it using: sudo apt-get install bluetoothctl. Ubuntu should take care of other dependencies.