About PPA - take a look here:

www.indilib.org/download.html

OK, I'll make OSX build later tonight, it is probably easier way to test it. Peter

David, you can download it from here: INDI_Server_2.0.7.dmg Peter

Installed INDI_Server_2.0.7
Ran Indi_server and Indi_Control_Panel. New dialog in Indi_Control_Panel with a Main submenu and Options submenu.
Set all the debug levels in the options submenu.
Set the port in the options submenu
Connection from Main was successful.
Looking at the log file ...
Getting firmware data timed out.
Then continuous errors processing declination and right ascension inputs.
Coordinates reported in the Control Panel were always zero even if the mount was driven manually.
I tried selecting the 'Park' position. Mount went to 00:00:00 in both axes.

The attachment did not show up. Try again to Add File.

Thanks for the log file, it was useful. I believe I fixed the issues, I'll ask Peter to make another OSX package so you can test.

Thanks for the log file, it was useful. I believe I fixed the issues, I'll ask Peter to make another OSX package so you can test.

David, you can try it with INDI_Server_2.0.8.dmg . Peter

Thank you both. Installed new Indi Server from Cloud Makers with indi_ieq_telescope version 1.0. Ran tests -- Still coordinate and other problems. See notes.
Sorry about all the GLT and GAS entries in the log.

Can you tell me what was the controller RA and DEC when you run the test?

No need, I was sending the wrong command (Thanks to Peter for catching this!). Please re-test again. This time, have all options turned on (Driver Debug + Scope verbose) for the first minute only, then turn off Scope verbose, and then proceed with your regular testing (parking, home, guiding...etc). Thanks for the detailed testing, it is very useful.

This change is in INDI_Server_2.0.9.dmg . Peter