×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

I would like support of Digital Setting Circles.

  • Posts: 447
  • Thank you received: 30
私はいつもあなたの助けに感謝しています。
私は更新されたDSCドライバをチェックしました。

私はそれを長い文章にするので3つに分けます。

エンコーダのステップは4096、AltAZ Mountです。
(前回と同じ山です。)
7 years 1 week ago #15488

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
About setting in half step
 
  It is from the Axis Settings tab.
 I tried the newly added Half button.
 
 # 1 Ticks Scale 0.087890625
 # 1 Ticks Offset -180
 # 2 Ticks Scale 0.087890625
 # 2 Ticks Offset -180
 
 With this setting, both Axis 1 and 2 become 0 and 0. (Azimuth angle 0 degree, altitude angle 0 degree)
 However, moving the azimuth angle from north to west will result in a negative angle.
 Both axes will be advanced from -180 ← 0 → 180.
 
 this
 
  # 1 Ticks Scale 0.087890625
 # 1 Ticks Offset 0
 # 2 Ticks Scale 0.087890625
 # 2 Ticks Offset 0
 
 If you do, Axis 1 and 2 will be both 180 and 180. (Azimuth angle 180 degrees, altitude angle 180 degrees)
 However, in this setting, both the azimuth angle and the altitude angle are displayed from 0 ° → 360 ° → 0 °,
 With this setting, if the initial value of Axis 1 and 2 becomes 0,0, it will be in the correct motion.
 
 # 1 Degrees Offset, # 2 Degrees Offset changes to Axis 1, 2 even if the value is changed
 It does not seem to work because it is not there.
7 years 1 week ago #15489

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
About operation of chart

I progressed while checking the movement of the star map of Kstars, but unless I pressed the sink button
It is not aligned with the angle between axis 1 and axis 2.
It does not move according to the angle of xis 1,2.

To operate with a certain degree of precision, move the mount to an easily recognizable number (for example, azimuth 180 degrees), hold the pointer at that position in the star chart, and press the synchronization button.
It is necessary to do the same operation also for the altitude angle.

However, even if you press the Sync button, since the numbers on axis 1 and axis 2 are not changed, inconsistent operation will occur, so please be careful.
7 years 1 week ago #15490

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
In conclusion, I think whether it will function properly if the following contents are satisfied.

1. Initial setting

# 1 tick scale 0.087890625
# 1 tick offset 0
# 2 tick scale 0.087890625
# 2 Tick offset 0

In this state, both axis 1 and axis 2 are changed to 0,0.

2. Link azimuth angle, altitude angle, and axes 1 and 2 of the star map of Kstars.

3. Press the Sync button to change the axes 1 and 2 to the azimuth and altitude angle of Kstars' star chart.

that's all.

Thank you.
7 years 1 week ago #15491

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
Other notes
The reverse check box previously reported,
It worked without problems.

I anticipate that the alignment system is operating on the Equator Equator, Equator Equator calculation.
However, DSC does not work properly unless Azis 1 and 2 of the azimuth and elevation of the star map are linked.

Currently it does not do exact movement with star map. Where to read the coordinates other than the position set with the sync button was another move.

Even now, when it is synchronized three times with the azimuth (0, 180, 359), only the azimuth angle is aligned to the star map, but the movement of the altitude angle is not vertical.
(When synchronized at the same time, the azimuth and altitude angle are not synchronized with the star map).

It is important that the azimuth, elevation angle of the chart, the number of axis 1 and axis 2 are linked at the first stage.
(In order to absorb the displacement of the mount button, it is better to consider the synchronization button as a button reflecting the azimuth and elevation of the star map of axis 1 and axis 2.
7 years 1 week ago #15492

Please Log in or Create an account to join the conversation.

I removed ticks scale and offsets from the driver since they seem to be causing confusion. Maybe next driver will be more clear.
The following user(s) said Thank You: T-Studio
7 years 1 week ago #15495

Please Log in or Create an account to join the conversation.

  • Posts: 454
  • Thank you received: 51
Hello,
Well DSC looks to works fine. I think I will be able to make a real test next week if the clouds let me do it.
After having done syncs on several stars a thing that would be nice to have is a big countdown counter that display the distance in azimuth and altitude to go from a current position to a chosen target. It might be activated by something like, for a goto telescope, a goto action in the drop down floating menu on the star map.
Last edit: 7 years 1 week ago by Patrick.
7 years 1 week ago #15499

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
I am always thankful for your help.

I am happy that it will be available around the summer.

Thank you for always responding.
7 years 1 week ago #15505

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
I am always thankful for your help.
I confirmed the operation in the room.
It seems to be moving accurately.
I will see the stars on a sunny day and check.
7 years 5 days ago #15597

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
It was sunny at last, I tried it.
I picked a star and tried Sync, but the position of the pointer was not changed.
As alignment items have increased, it may not be set correctly.
I will change the setting again and try it.
6 years 11 months ago #15945

Please Log in or Create an account to join the conversation.

  • Posts: 447
  • Thank you received: 30
I need a brief explanation of the alignment tab settings.
6 years 11 months ago #15946

Please Log in or Create an account to join the conversation.

We might have an update soon for the default Alignment so please stay tuned.
The following user(s) said Thank You: T-Studio
6 years 11 months ago #15947

Please Log in or Create an account to join the conversation.

Time to create page: 0.586 seconds