Michele Bertuccio replied to the topic 'Kstars interface' in the forum. 7 days ago

Thank you for the reply.
Horizontal coordinates can be obtained with the "indi_getprop "Telescope Simulator.HORIZONTAL_COORD.*" command?
When I run this command, I receive no response.
Thank you

Read More...

Michele Bertuccio replied to the topic 'Kstars interface' in the forum. 7 days ago

Good morning
Sorry for the next day for the mistake, but I was sleeping.
Now everything works properly, but I have another question.
With this command I get the equatorial coordinates.
Which command I have to give with GetProp to get the altazimuth coordinates?
Thank you

Read More...

Michele Bertuccio replied to the topic 'Kstars interface' in the forum. 2 weeks ago

Good morning
I started ekos via remote raspberry and everything works properly.
Why when I send the command with the shell
“indi_setprop "Telescope Simulator.EQUATORIAL_EOD_COORD.RA; DEC = 30; 100"
I receive the message
“indi_setprop Command not found”?
Thank you

Read More...

Michele Bertuccio replied to the topic 'Kstars interface' in the forum. 2 weeks ago

I get this "No EQMod Mount.EQUATORIAL_EOD_COORD.RA;DEC from localhost:7624

Read More...

Michele Bertuccio replied to the topic 'Kstars interface' in the forum. 2 weeks ago

It is best to forget the Mac for the moment.
About space, I can confirm that there are no space but the command as it is written creates an error.
That's why I modified the line like this:
indi_setprop "EQMod Mount" .EQUATORIAL_EOD_COORD.RA = 6; DEC = 50; and the command seems to be accepted.
Can you send me the exact command line for the telescope simulator?
Thank you

Read More...

Michele Bertuccio replied to the topic 'Kstars interface' in the forum. 2 weeks ago

Good morning
I tried to give indi_setprop command "EQMod Mount" .EQUATORIAL_EOD_COORD.RA; DEC = 6; 50” on the Mac but the terminal does not recognize the command "unknown command".
So I tried it on the virtual machine and this recognizes the indi_setprop command and when I do the same command, I get “”DEC 00 command not found “ and “50 command not found.”.
So I have two questions:
Why this command is not recognized on Mac (on Mac are installed INDI Server and Kstars).
Why in the virtual machine I get the messages listed above and in Kstars nothing happens.
Please, can you give me exactly the directions of how to fix these problems using indi_simulator_telescope?
Thank you

Read More...

Michele Bertuccio replied to the topic 'Kstars interface' in the forum. 2 weeks ago

Thank you for your answer.
As you suggested, I tried to give indi_setprop in the terminal but every time I get an unknown command.
If this command works, for me it would be an ideal situation because it is very easy to integrate it into the XOJO database.
With DBus, integration into xojo is more complex and with little chance of success.
What can I do to run setprop?
Thank you

Read More...

Michele Bertuccio replied to the topic 'Kstars interface' in the forum. 2 weeks ago

No. I use Indiserver for mac. When I use indiserver from Kstar, I have communication problems.
So i start indiserver for mac and after INDI Control Panel.
In Kstar, I open Ekos and I connect but Kstar tells me if I want to turn off the current instance and I answer no.
The telescope simulator is then connected and inserting RA and DEC in the control panel, I can move the pointer.

Read More...

Teseo thanked Michele Bertuccio in topic Kstars interface 2 weeks ago
Michele Bertuccio created a new topic ' Kstars interface' in the forum. 2 weeks ago

Good morning

I have a question about the possibily to send RA and DEC from my software which is a very big database with all the constellations and its stars, all the Messier objects, the exoplanet catalog, and finally the NEOs.
My software has been done with XOJO.
The software produces simple strings, but I do not know how to read these strings to Kstars software to create interactivity and then see the telescope pointer move to Kstars.
I tried sending data via Http but I did not get results.
At this point, I tried indiserver with INDI Control Panel which works correctly, but the problem is how to send the strings generated from my software to INDI Control Panel.
You have some advice about.
Thank you

Read More...

Michele Bertuccio replied to the topic 'photo' in the forum. 12 months ago

I gave the following command:
gsettings set org.gnome.desktop.media-handling automount true

Read More...

Michele Bertuccio replied to the topic 'photo' in the forum. 12 months ago

I've re-enabled auto-mount and now everything seems to work properly.

Read More...

Michele Bertuccio replied to the topic 'photo' in the forum. 12 months ago

No. I tried it with the command line, but egos does not detect the nikon, and when from the command line I send the dmesg command, I can see the nikon.

Read More...

Michele Bertuccio replied to the topic 'photo' in the forum. 12 months ago

As described on the forum, I disabled auto-mounting feature, but the Nikon give me an error that has changed in unknown device.

Read More...

Michele Bertuccio created a new topic ' photo' in the forum. less than a minute ago

Hello.
I have two questions.
I connected Synscan and the Nikon D5550. The mount works perfectly, but when I plug in my Nikon, I get the error (-53) that can not connect to the USB and asks me if Power is OK. The raspberry, connects with nikon and I can see the nikon, but Ekos give me the error.
The other question is why when I start the simulation server via indiwebmanager, I have the stars Got no problem, but if I start the server via the terminal (indiserver -vv indi_simulator_telescope indi_simulator_ccd indi_simulator_focus), everything works perfectly.
Thank you

Read More...

Michele Bertuccio replied to the topic 'GSC' in the forum. 1 year ago

Finally, I found the problem, and perhaps it can be useful to other users.
I reinstalled Debian libindi, gsc, WebManager.
When I do start the server with the WebManager, I get the problem of "Got no star", but if on the raspberry, I start the server without the web manager, but directly on the terminal, everything works fine.
So I guess the problem is in setting of the web manager, who does not allow communication with the gsc.

Read More...

Michele Bertuccio replied to the topic 'GSC' in the forum. 1 year ago

everything works properly.
thank you

Read More...

Michele Bertuccio replied to the topic 'GSC' in the forum. 1 year ago

I followed the advice, and I switched to MATE.
Locally, everything seems to work well.
I just want to ask if to install indiwebmanager, I have to follow the normal procedure.

Read More...

Michele Bertuccio replied to the topic 'GSC' in the forum. 1 year ago

Hello.
The language is English.
I tried to install the package with both the installer and the terminal, but when I install it with the installer, after a few minutes, the installation stops, and when I install it via the terminal, going to the directory where the package is, I get Unable to locate the file.
I tried a new SIM with the new OS and with the update, but the result is always the same.
The Raspbian version, is the 2016-05 jessie. The 2015 versions do not work on this new raspberry raspberry ft3 because it is 64-bit system.
I start to go crazy, but I think INDI Ekos is the best system for our observatory.

Read More...

Michele Bertuccio replied to the topic 'GSC' in the forum. 1 year ago

I have just installed the package, but the result is always the same.

Read More...

Login



3rd Party

Choose from the numerous 3rd party INDI drivers to suit your needs!

Got Problem?

Check out the FAQ, the forum, and the bug tracking system to resolve any issues you might have!
You can also subscribe to INDI newsletter and development mailing lists to get the latest updates on INDI!