Simulation adapter for testing and development. More...

#include <gemini_flatpanel_adapters.h>

Inheritance diagram for GeminiFlatpanelSimulationAdapter:

Public Member Functions
	GeminiFlatpanelSimulationAdapter (bool simulateRev2Features=true)

bool	ping () override
	Ping the device to check if it responds to this adapter's protocol.

int	getRevision () const override
	Get the firmware revision this adapter supports.

bool	getFirmwareVersion (int *version) override
	Get the firmware version from the device.

bool	supportsBeep () const override
	Check if device supports beep functionality.

bool	supportsDustCap () const override
	Check if device supports dust cap functionality.

bool	supportsBrightnessMode () const override
	Check if device supports brightness mode selection (high/low)

bool	getConfigStatus (int *status) override
	Get the current configuration status.

bool	getBrightness (int *brightness) override
	Get the current brightness level.

bool	setBrightness (int value) override
	Set the brightness level.

bool	lightOn () override
	Turn the light on.

bool	lightOff () override
	Turn the light off.

bool	openCover () override
	Open the dust cover.

bool	closeCover () override
	Close the dust cover.

bool	getStatus (int coverStatus, int lightStatus, int *motorStatus) override
	Get the current device status.

bool	move (uint16_t value, int direction) override
	Move the cover by a specified amount.

bool	setClosePosition () override
	Set the current position as the closed position.

bool	setOpenPosition () override
	Set the current position as the open position.

bool	setBeep (bool enable) override
	Enable or disable beep functionality.

bool	setBrightnessMode (int mode) override
	Set the brightness mode (high/low)

char	getCommandTerminator () const override
	Get the command terminator character for this revision.

void	setupCommunication (int portFD) override
	Set up communication parameters for this revision.

Public Member Functions inherited from GeminiFlatpanelAdapter
virtual	~GeminiFlatpanelAdapter ()=default

Detailed Description

Simulation adapter for testing and development.

This adapter simulates device behavior without requiring actual hardware. It can simulate either Rev1 or Rev2 features based on configuration.

Definition at line 658 of file gemini_flatpanel_adapters.h.

Constructor & Destructor Documentation

◆ GeminiFlatpanelSimulationAdapter()

GeminiFlatpanelSimulationAdapter::GeminiFlatpanelSimulationAdapter ( bool simulateRev2Features = true )

Definition at line 1622 of file gemini_flatpanel_adapters.cpp.

Member Function Documentation

◆ closeCover()

bool GeminiFlatpanelSimulationAdapter::closeCover ( )

overridevirtual

Close the dust cover.

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1726 of file gemini_flatpanel_adapters.cpp.

◆ getBrightness()

bool GeminiFlatpanelSimulationAdapter::getBrightness ( int * brightness )

overridevirtual

Get the current brightness level.

Parameters

brightness pointer to store the brightness value (0-255)

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1691 of file gemini_flatpanel_adapters.cpp.

◆ getCommandTerminator()

char GeminiFlatpanelSimulationAdapter::getCommandTerminator ( ) const

overridevirtual

Get the command terminator character for this revision.

Returns: terminator character ('
' for rev1, '#' for rev2)

Implements GeminiFlatpanelAdapter.

Definition at line 1792 of file gemini_flatpanel_adapters.cpp.

◆ getConfigStatus()

bool GeminiFlatpanelSimulationAdapter::getConfigStatus ( int * status )

overridevirtual

Get the current configuration status.

Parameters

status pointer to store the configuration status

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1685 of file gemini_flatpanel_adapters.cpp.

◆ getFirmwareVersion()

bool GeminiFlatpanelSimulationAdapter::getFirmwareVersion ( int * version )

overridevirtual

Get the firmware version from the device.

Parameters

version pointer to store the firmware version

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1658 of file gemini_flatpanel_adapters.cpp.

◆ getRevision()

int GeminiFlatpanelSimulationAdapter::getRevision ( ) const

overridevirtual

Get the firmware revision this adapter supports.

Returns: revision number (1, 2, etc.)

Implements GeminiFlatpanelAdapter.

Definition at line 1653 of file gemini_flatpanel_adapters.cpp.

◆ getStatus()

bool GeminiFlatpanelSimulationAdapter::getStatus	(	int *	coverStatus,
		int *	lightStatus,
		int *	motorStatus
	)

overridevirtual

Get the current device status.

Parameters

coverStatus	pointer to store cover status
lightStatus	pointer to store light status
motorStatus	pointer to store motor status

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1732 of file gemini_flatpanel_adapters.cpp.

◆ lightOff()

bool GeminiFlatpanelSimulationAdapter::lightOff ( )

overridevirtual

Turn the light off.

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1714 of file gemini_flatpanel_adapters.cpp.

◆ lightOn()

bool GeminiFlatpanelSimulationAdapter::lightOn ( )

overridevirtual

Turn the light on.

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1708 of file gemini_flatpanel_adapters.cpp.

◆ move()

bool GeminiFlatpanelSimulationAdapter::move	(	uint16_t	value,
		int	direction
	)

overridevirtual

Move the cover by a specified amount.

Parameters

value	number of steps to move
direction	direction of movement (1 for open, -1 for close)

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1740 of file gemini_flatpanel_adapters.cpp.

◆ openCover()

bool GeminiFlatpanelSimulationAdapter::openCover ( )

overridevirtual

Open the dust cover.

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1720 of file gemini_flatpanel_adapters.cpp.

◆ ping()

bool GeminiFlatpanelSimulationAdapter::ping ( )

overridevirtual

Ping the device to check if it responds to this adapter's protocol.

Returns: true if device responds correctly, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1647 of file gemini_flatpanel_adapters.cpp.

◆ setBeep()

bool GeminiFlatpanelSimulationAdapter::setBeep ( bool enable )

overridevirtual

Enable or disable beep functionality.

Parameters

enable true to enable beep, false to disable

Returns: true if successful, false if not supported or failed

Implements GeminiFlatpanelAdapter.

Definition at line 1765 of file gemini_flatpanel_adapters.cpp.

◆ setBrightness()

bool GeminiFlatpanelSimulationAdapter::setBrightness ( int value )

overridevirtual

Set the brightness level.

Parameters

value brightness value (0-255)

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1697 of file gemini_flatpanel_adapters.cpp.

◆ setBrightnessMode()

bool GeminiFlatpanelSimulationAdapter::setBrightnessMode ( int mode )

overridevirtual

Set the brightness mode (high/low)

Parameters

mode	brightness mode (GEMINI_BRIGHTNESS_MODE_LOW or GEMINI_BRIGHTNESS_MODE_HIGH)

Returns: true if successful, false if not supported or failed

Implements GeminiFlatpanelAdapter.

Definition at line 1776 of file gemini_flatpanel_adapters.cpp.

◆ setClosePosition()

bool GeminiFlatpanelSimulationAdapter::setClosePosition ( )

overridevirtual

Set the current position as the closed position.

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1755 of file gemini_flatpanel_adapters.cpp.

◆ setOpenPosition()

bool GeminiFlatpanelSimulationAdapter::setOpenPosition ( )

overridevirtual

Set the current position as the open position.

Returns: true if successful, false otherwise

Implements GeminiFlatpanelAdapter.

Definition at line 1760 of file gemini_flatpanel_adapters.cpp.

◆ setupCommunication()

void GeminiFlatpanelSimulationAdapter::setupCommunication ( int portFD )

overridevirtual

Set up communication parameters for this revision.

Parameters

portFD file descriptor for the serial port

Implements GeminiFlatpanelAdapter.

Definition at line 1798 of file gemini_flatpanel_adapters.cpp.

◆ supportsBeep()

bool GeminiFlatpanelSimulationAdapter::supportsBeep ( ) const

overridevirtual

Check if device supports beep functionality.

Returns: true if beep is supported

Implements GeminiFlatpanelAdapter.

Definition at line 1670 of file gemini_flatpanel_adapters.cpp.

◆ supportsBrightnessMode()

bool GeminiFlatpanelSimulationAdapter::supportsBrightnessMode ( ) const

overridevirtual

Check if device supports brightness mode selection (high/low)

Returns: true if brightness modes are supported

Implements GeminiFlatpanelAdapter.

Definition at line 1680 of file gemini_flatpanel_adapters.cpp.

◆ supportsDustCap()

bool GeminiFlatpanelSimulationAdapter::supportsDustCap ( ) const

overridevirtual

Check if device supports dust cap functionality.

Returns: true if dust cap is supported

Implements GeminiFlatpanelAdapter.

Definition at line 1675 of file gemini_flatpanel_adapters.cpp.

The documentation for this class was generated from the following files:

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ GeminiFlatpanelSimulationAdapter()

Member Function Documentation

◆ closeCover()

◆ getBrightness()

◆ getCommandTerminator()

◆ getConfigStatus()

◆ getFirmwareVersion()

◆ getRevision()

◆ getStatus()

◆ lightOff()

◆ lightOn()

◆ move()

◆ openCover()

◆ ping()

◆ setBeep()

◆ setBrightness()

◆ setBrightnessMode()

◆ setClosePosition()

◆ setOpenPosition()

◆ setupCommunication()

◆ supportsBeep()

◆ supportsBrightnessMode()

◆ supportsDustCap()