Hi,
Had to re-flash yesterday last minute after trying to install an RTC module and managing to break everything by running updates on my pi. Thought I managed to grab the important files before doing so, but couldn't find the ekos settings for backup. After resetting everything up I can't get PHD2 to connect to my mount at all, and can't remember how it was setup before when it worked perfectly.
I'm using an AZ-gti in EQ mode, connected with a EQmod cable, when setting up phd2 Selecting indi mount brings up the indi mount selection box, but it will not connect to let me pick the driver. when looking at the logs it seems to be trying to connect to my ASI120mm camera instead of the mount.
16:42:34.234 00.000 3009901168 Status Line: Connecting to Mount ...
16:42:34.235 00.001 3009901168 Connecting to mount [INDI Mount]
16:42:34.269 00.034 2984030256 INDIConfig: newDevice ZWO CCD ASI120MM Mini
16:42:34.278 00.009 2984030256 device ZWO CCD ASI120MM Mini interface(s) CCD|GUIDER
16:42:34.278 00.000 2984030256 exclude device ZWO CCD ASI120MM Mini not a valid mount
16:42:34.315 00.037 2984030256 INDIConfig: newDevice EQMod Mount
16:42:34.318 00.003 2984030256 device EQMod Mount interface(s) TELESCOPE|GUIDER
16:42:36.985 02.667 3009901168 evsrv: cli 0xde0518 request: {"id":154,"jsonrpc":"2.0","method":"get_connected"}
16:42:36.985 00.000 3009901168 evsrv: cli 0xde0518 response: {"jsonrpc":"2.0","result":false,"id":154}
Any help would be greatly appreciated.
And before the use the internal guider answers, I did last night and it worked okish, but I prefer PHD2 and have more experience getting it to do what I want.
Topic Author
