×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

KStars crashes on connecting Ekos profile with Sky-Watcher EQMOD mount driver

  • Posts: 326
  • Thank you received: 50
Just updated Astroberry from KStars 3.5.5 to 3.5.6 using ‘sudo apt update’ followed by ‘sudo apt upgrade’. Open KStars, start up my usual Ekos profile with ZWO cameras and Sky-watcher EQMOD mount (EQDirect cable connection to AZGTi) and KStars crashes. Wake up KStars again, replace the EQMOD mount in the Ekos profile with the Telescope Simulator and KStars continues to run.
2 years 2 months ago #79029

Please Log in or Create an account to join the conversation.

  • Posts: 54
  • Thank you received: 5
Hi, I have a similar configuration and I got the same result ;-(
2 years 2 months ago #79030

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 2
I have the same issue. kstars crashes when I connect to EQMOD. This is after the upgrade to 3.5.6.
Kernel message:<code>[ 103.349143] Alignment trap: not handling instruction ed917b06 at [<00431e4c>]
[ 103.349152] 8<--- cut here ---
[ 103.349165] Unhandled fault: alignment exception (0x221) at 0xb6e7a6ed
[ 103.349176] pgd = 326a05e4
[ 103.349185] [b6e7a6ed] *pgd=06121003, *pmd=7cd45003</code>
 
2 years 2 months ago #79049

Please Log in or Create an account to join the conversation.

  • Posts: 983
  • Thank you received: 375
The following user(s) said Thank You: Arun Venkataswamy, Avocette, JuergenN
2 years 2 months ago #79051

Please Log in or Create an account to join the conversation.

  • Posts: 217
  • Thank you received: 19
Just stumpled over this issue. Update worked for me :-)

Thank you!
2 years 2 months ago #79052

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 2
Thanks for the quick update! It works now.

Regards,
Arun
 
2 years 2 months ago #79055

Please Log in or Create an account to join the conversation.

  • Posts: 326
  • Thank you received: 50
2 years 2 months ago #79059

Please Log in or Create an account to join the conversation.

  • Posts: 114
  • Thank you received: 5
That may explain why it started to work for me as well.
2 years 2 months ago #79380

Please Log in or Create an account to join the conversation.

Moderators: Radek Kaczorek
Time to create page: 1.190 seconds