I'm new to the astroberry community. I'm looking to do stacking for planetary and some deep sky objects. Any recommendations for software preinstalled on the astroberry o/s installation or anything that I could install that folks have been happy with?
Siril is available on Raspian OS (buster), the OS that Astroberry is based on. You can use the Debian package search to see which packages are available out of the box, by looking for „armhf“ architecture. Then use „sudo apt install <package>“
I recommend ASTAP.
I have not tried it on astroberry but it works fine on Raspberry Pi OS, which is what I believe astroberry is using.
Losmandy G11 with Gemini 2 controller
QSI 583/683 monochrome camera with filter wheel
Starlight Xpress Lodestar X2 guide camera
Microtouch Focuser controlled using Arduino UNO emulating Feathertouch controller
Raspberry Pi 2GB with Raspberry Pi OS 32bit
For planetary stacking there are no real solution. I've been trying to install PlanetarySystemStacker with no luck (there are some dependencies not available yet on arm or arm64).
For deep sky stacking and some preprocessing and analysis I've been using SiriL. You must download and compile the most recent code on the repo, because the version included on Astroberry is very old. I've been using SiriL for more than a year with good results.
But this will be useful for a quick and dirty stack on the field. The Raspberry Pi doesn't have the needed performance for any serious image processing task.