INDI Library v1.7.6 Released. (27 Feb 2019)

First release of 2019 comes with quite a few new drivers across the board along with significant performance improvements to INDI camera and live streaming performance. Many drivers received significant updates to improve performance & stability, while a few were re-written from scratch to be in line with INDI standards. Here are some of the highlights:

Change Screen Resolution

  • Posts: 4
  • Thank you received: 0

Change Screen Resolution was created by wornish

I am successfully running astroberry on my RPi3b.
When I access it from my laptop the Display in Monitor Preferences is set to unknown and the screen resolution is set to 1920 x 1080.
Is it possible to change this so it will fit on my windows laptop which has a max resolution of 1366 x 768 without the need for scroll bars?
3 days 13 hours ago #37848
The topic has been locked.
  • Posts: 349
  • Thank you received: 47

Replied by AstroNerd on topic Change Screen Resolution

Yes it is, but cant remember offhand, it’s in one of the configuration files you have to edits one of the lines, all the available resolutions have a number next to them, and you put the number in that corresponds to the resolution you want...
Stellarmate OS on Raspberry pi3b+ controlled with Kubuntu laptop
NEQ6 Pro, belt modded & tuned
Meade series 5000 80mm triplet Apo & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar Guide Camera
Pegasus Ultimate Hub for all USB & Power
Pegasus focus motors on both scopes
3 days 8 hours ago #37872
The topic has been locked.
  • Posts: 720
  • Karma: 6
  • Thank you received: 196

Replied by wvreeven on topic Change Screen Resolution

If I recall correctly the file to edit is /boot/config.txt
Modded Canon EOS 700D with a SkyWatcher Esprit 80 ED on a SkyWatcherHEQ5-Pro

ASI1600MM-C CCD and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R
3 days 8 hours ago #37873
The topic has been locked.
  • Posts: 493
  • Karma: 1
  • Thank you received: 85

Replied by Ihoujin on topic Change Screen Resolution

Change the /boot/config.txt file to set the HDMI mode.
The config file includes a list of HDMI Group 1 and Group 2 display settings, you can also find CEA/DMT tables online. It is also possible to create custom settings that are non-standard.
Myself I use these lines:
hdmi_mode 83
83 corresponds to 1600x900.
For your case, Group 2, mode 39 is 1360x786 60Hz

You may refer for more information here
INDI/KStars on Raspberry Pi 3B+
Lubuntu 16.04
Skywatcher HEQ5 Pro Mount
Canon 600D Camera
Orion SSAG @280mm Guide Scope
Adafruit Motor Hat shield
Adafruit GPS Module
Generic Bluetooth Joystick.
Startech 7 port powered USB Hub.
The following user(s) said Thank You: wornish
3 days 1 hour ago #37893
The topic has been locked.
  • Posts: 629
  • Karma: 6
  • Thank you received: 239

Replied by Kaczorek on topic Change Screen Resolution

You can reconfigure as already discussed OR use Local Scaling option available in Settings menu in the sliding panel.
This option is available only when Astroberry is accessed with a web browser. It will rescale 1920x1080 to your screen resolution, whatever it is.
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
1 day 19 hours ago #37950
The topic has been locked.
Moderators: Kaczorek
Time to create page: 0.209 seconds