×
INDI Library v1.8.7 Released (21 Nov 2020)

Nov. 2020 Release brings significant improvements to streaming and recording videos. Support for new drivers including Estatto focuser and Pegasus falcon rotator.

Astroberry Server 2.0.0 is available now!

1 year 1 week ago 1 year 1 week ago by rizal72.
rizal72
Fresh Boarder
Fresh Boarder
Posts: 13
More
Astroberry Server 2.0.0 is available now! #46027
Thanks! I've always loved Astroberry.

However, right now, the download link for the compressed img is not working.
www.astroberry.io/distro/astroberry-server_2.0.0.img.xz

Finally, I was able to download it, just deleting the .xz extension from the url ;)
www.astroberry.io/distro/astroberry-server_2.0.0.img
The topic has been locked.
1 year 1 week ago
Kaczorek
Moderator
Moderator
Posts: 966
Karma: 6
More
Topic Author
Astroberry Server 2.0.0 is available now! #46034

--
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
The topic has been locked.
1 year 1 week ago 1 year 1 week ago by Avocette.
Avocette
Expert Boarder
Expert Boarder
Posts: 159
More
Astroberry Server 2.0.0 is available now! #46050
Hi Radek, and many thanks for your efforts in preparing Astroberry 2.0.0!
Of course some of us are going to have some tiny issues in the coming days, and the one that is stumping me is to do with the 'Weather Plugin'. The first couple of times I attempted to set it up I was running in HotSpot mode and when I realized this, I hit 'Cancel' in the Weather Preferences dialogue box. This closed not only the dialogue box but also the whole task bar disappeared. I didn't have the skills to get it going again, so had to carry out a brutal physical power down/power up to recover. Happily this didn't damage the SD card image.
I tried updating the Weather Preferences again this time with Internet connection and was successful. However my location data was not saved on shutdown so it seems this is a burden of each power up routine at the moment.
I have subsequently added a GPS dongle (installed GPSD etc) and wondered if the GPS data could be used to establish my location coordinates? I read the intriguing words: - Web Interface featuring GPS Panel and Astro Panel....... in your original post and just wondered if you could add a little more information about how to use these?
Thanks, Ed

Currently running KStars/Ekos/Indi on a Raspberry Pi 4B 4GByte under Raspberry Pi OS thanks to Astroberry
Sky-Watcher ED80 Pro with 0.85x FR/Corrector with Canon DSLR and ASI533MC on AZ-EQ5 GT mount
Other Sky-Watcher scopes - SkyMax 150 Pro Maksutov Cassegrain and Explorer 150p Newtonian
The topic has been locked.
1 year 1 week ago
Kaczorek
Moderator
Moderator
Posts: 966
Karma: 6
More
Topic Author
Astroberry Server 2.0.0 is available now! #46051
Hi Ed, Thanks for your input. Issues reporting is highly appreciated. Let's make it easier for other users too and use github.com/rkaczorek/astroberry-server/issues

In your very case, it's not really an issue, but I understand that user manual would make it easier. Especially for new features introduced in this version.

Astro Panel (accessible in the sliding menu) determines location in the following order:
- user weather file (/home/astroberry/.config/lxpanel/LXDE-astroberry/panels/panel)
- system weather file (/etc/xdg/lxpanel/LXDE-astroberry/panels/panel)
- config file (/etc/astropanel.conf)
- GPS

At the first boot only system weather file exists, so default location for weather and Astro Panel are Warsaw, Poland.
As soon as you customize your Taskbar user weather file is used. BTW If you set the location for the first time use Panel Settings / Panel Applets and scroll to Weather Plugin, then click Preferences. Otherwise the settings will not be saved. It should not be a problem for subsequent changes. This comes from the panels logic (I do not program this part) - the first customization of Taskbar makes a copy of system weather file (default) to user weather file.
Anyway, when changing Weather Plugin location you need to be online, because the Weather Plugin uses Open Weather Map as source of location and weather data.

Nevertheless, you can create your own configuration (see config file above). This should make Astro Panel ignore Weather Plugin location data. It should but it does not at the moment due to my mistake.
As the matter of fact the proper order should be:
- config file (/etc/astropanel.conf)
- GPS
- user weather file (/home/astroberry/.config/lxpanel/LXDE-astroberry/panels/panel)
- system weather file (/etc/xdg/lxpanel/LXDE-astroberry/panels/panel)

I realized this fact after I have released the system. It will be changed in the future versions. It will come with regular system updates so you don't need to worry.
As for now just set a proper location in Weather Plugin and you will be fine, both for weather and Astro Panel.

And last but not least, yes the Astro Panel can use GPS data as a source of location ;-)

--
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
The following user(s) said Thank You TomAstro, Avocette
The topic has been locked.
1 year 1 week ago
TomAstro
Gold Boarder
Gold Boarder
Posts: 199
More
Astroberry Server 2.0.0 is available now! #46073
Hi,

Is the kstars nightly build?

Regards,
Tom

Skywatcher AZEQ5GT using EQMod
Pentax 100 SDUFII for the light
QHY168C mains with ASI120MC on guidescope
SX filter wheel
Robofocus focusers with DIY Moonlite compatible controller
RPI 4B, Stellarmate & Astroberry
The topic has been locked.
1 year 6 days ago
Avocette
Expert Boarder
Expert Boarder
Posts: 159
More
Astroberry Server 2.0.0 is available now! #46101
Hi Radek, After a couple of days of 'playing', I have noted a few things which are not so much issues, but perhaps missing FAQs to help the first time user:
I happen to use a Swiss French keyboard layout so the default password is 'astroberrz' - easy enough to cope with until you can log into the raspi-config tab menus. I also happen to use an iPad as my client terminal so I didn't see the sliding panel in the iOS Firefox browser implementation. I did see this when I swapped over to a Windows 10 laptop, and immediately understood about the sliding panel, although not all functions perfectly (yet).
I confirmed that the gpsd daemon was active and so tried to use my GPS dongle, after editing /etc/default/gpsd to include the device as dev/ttyACM0. The GPS Satellite Map did pick up several satellites, but never at enough signal strength to influence the GPS info Lat and Longitude. The same dongle normally works very well in EKOS/Indi with a full 3D fix in seconds. Is there some extra constraint in the Astroberry implementation which requires a higher signal strength (I wouldn't have thought so)?
My normal configuration involves being in the field away from home WiFi and therefore the Internet, and using the RPi as a WiFi HotSpot. This does work, but the lack of Internet means that some functionality, such as the Weather App, and the location setting, are a bit redundant.
I'll keep on trying things out as I find time!
Thanks again, Ed

Currently running KStars/Ekos/Indi on a Raspberry Pi 4B 4GByte under Raspberry Pi OS thanks to Astroberry
Sky-Watcher ED80 Pro with 0.85x FR/Corrector with Canon DSLR and ASI533MC on AZ-EQ5 GT mount
Other Sky-Watcher scopes - SkyMax 150 Pro Maksutov Cassegrain and Explorer 150p Newtonian
The following user(s) said Thank You pug916
The topic has been locked.
1 year 6 days ago
AstroNerd
Moderator
Moderator
Posts: 876
Karma: 1
More
Astroberry Server 2.0.0 is available now! #46102
Just a FYI, 4k does NOT work on this version of Astroberry, yet I have buster on another card and runs in 4K fine, is there a reason for this not working, as I use a 4k monitor...one of the reasons to move to rpi4 was the 4k option, I have tried editing the config.txt file but no use...or raspi-config does not display the 4k resolutions either, yet they are there in Raspbian buster...

Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85 & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on both scopes
The topic has been locked.
1 year 6 days ago
AstroNerd
Moderator
Moderator
Posts: 876
Karma: 1
More
Astroberry Server 2.0.0 is available now! #46106
Managed to get it up to 2560 x 1600 but can’t get put to 4k...the settings to change are not there the same as they are on straight raspbian buster..

Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85 & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on both scopes
The topic has been locked.
1 year 6 days ago
AstroNerd
Moderator
Moderator
Posts: 876
Karma: 1
More
Astroberry Server 2.0.0 is available now! #46107
How do you stop this coming up every boot up...I have done all the required setting up...

Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85 & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on both scopes
Attachments:
The following user(s) said Thank You pug916
The topic has been locked.
1 year 6 days ago
rizal72
Fresh Boarder
Fresh Boarder
Posts: 13
More
Astroberry Server 2.0.0 is available now! #46108

AstroNerd wrote: How do you stop this coming up every boot up...I have done all the required setting up...


Same for me, cannot get rid of it too... :)
The topic has been locked.
1 year 6 days ago 1 year 5 days ago by AstroNerd.
AstroNerd
Moderator
Moderator
Posts: 876
Karma: 1
More
Astroberry Server 2.0.0 is available now! #46109

rizal72 wrote:

AstroNerd wrote: How do you stop this coming up every boot up...I have done all the required setting up...


Same for me, cannot get rid of it too... :)


I get this and a password box coming up...and can’t stop either of them.... any ideas...? :)

Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85 & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on both scopes
The topic has been locked.
1 year 6 days ago
AstroNerd
Moderator
Moderator
Posts: 876
Karma: 1
More
Astroberry Server 2.0.0 is available now! #46119
I have changed the password three times to my own from Astroberry, and still it needs Astroberry password on a few things and my own works on others, which is really annoying as I don’t know which one it wants and have to try both till one works, sometimes my own works and sometimes Astroberry works... ☹️☹️???

Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85 & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on both scopes
The topic has been locked.
Moderators: Kaczorek
Time to create page: 0.579 seconds