I am trying to connect my Canon 500D to KStars but the INDI driver keeps crashing. The protocol states the following:
startup: /usr/bin/indiserver -v -p 7625 -m 399 -r 0 .f /tmp/indififoe0d97c49
listening to port 7625 on fd3
FIFO: start indi_canon_ccd
FIFO: starting driver indi_canon_ccd
Driver indi_canon_ccd: pid=10596 rfd=4 wfd=7 efd=8
Client 5: new arrival from 127.0.0.1:51778 - welcome!
Driver indi_canon_ccd: indi_canon_ccd: symbol lookup error /usr/lib/arm-linux-gnueabihf/libindidriver.so.1: undefined symbol: ISSnoopDevice
Driver indi_canon_ccd: stderr EOF
Driver indi_canon_ccd: Terminated after #10 restarts
There are a few threads which mention this topic but unfortunately, I wasn't able to find a solution from these. I ran apt-get update and apt-get upgrade today so the drivers, system etc. should be up to date. What's confusing me especially is that I can control the camera with gphoto2 without any issue so it's KStars which causes the issue. Any idea on how to solve this?
What are the Versions? Please run the following command and post output:
$ dpkg -l indi-bin indi-gphoto libgphoto2\*
A working config on Astroberry is (last tried a few weeks back, due to clouds) is:
||/ Name Version Architektur Beschreibung
+++-=======================-============-============-==========================
ii indi-bin 1.9.2-1 armhf INDI server, drivers and t
ii indi-gphoto 3.0-8 armhf INDI GPhoto (DSLR) Camera
ii libgphoto2-6:armhf 2.5.27 armhf gphoto2 digital camera lib
ii libgphoto2-port12:armhf 2.5.27 armhf gphoto2 digital camera por
Thanks for your help, guys! I did as you asked, here's the table:
||/ Name Version Architektur Beschreibung
+++-=======================-============-============-==========================
ii indi-bin 1.8.6 armhf INDI server, drivers and t
ii indi-gphoto 3.0-8 armhf INDI GPhoto (DSLR) Camera
ii libgphoto2-6:armhf 2.5.27 armhf gphoto2 digital camera lib
un libgphoto2-l10n <keine> <keine> (keine Beschreibung vorhan
un libgphoto2-port10 <keine> <keine> (keine Beschreibung vorhan
ii libgphoto2-port12:armhf 2.5.27 armhf gphoto2 digital camera por
It seems like a) indi-bin is not up to date and b) somethings odd with libgphoto2-l10n and libgphoto2-port10.
A line starting with „un“ means „unknown“ and „not installed“. Happens when a package is mentioned or requested by another package, but is then finally not installed or was not in the repository. See header printed before the table. These can be safely ignored and to be honest I removed these entries for clarity. Sorry for the confusion this has caused.