×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Kstars/Ekos crashes with Nikon D3500 while downloading second photo.

  • Posts: 9
  • Thank you received: 0
Son of a gun, I finally figured out how to turn off the FITS viewer and WALA... I can take more than two photos and have them saved to the raspberry pi. Thank you so much. Now I can use my Bahtinov mask. I wish that the FITS viewer can be fixed.
1 year 11 months ago #82214

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 0
Son of a gun, I finally figured out how to turn off the FITS viewer and WALA... I can take more than two photos and have them saved to the raspberry pi. Thank you so much. Now I can use my Bahtinov mask. I wish that the FITS viewer can be fixed.
1 year 11 months ago #82215

Please Log in or Create an account to join the conversation.

  • Posts: 114
  • Thank you received: 5
That is good, although I had a similar issue and the latest update cleared this problem. Go to KStars about and check you have 3.5.8.

Update if you have 3.5.7 or lower.
1 year 11 months ago #82232

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 0
Malcolm, you were right again. I went and looked and I was running Kstars 3.5.7. I have updated to 3.5.8. If I get clear skies, I will give it a run. Thanks again.

Carlos.
1 year 11 months ago #82239

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 0
I am sorry to say that after upgrading to Kstars 3.5.8, I still cannot take more than a couple of photos with the Fits Viewer enabled. Kstars/Ekos crashes while downloading the image, just like when I first posted. Malcon has isolated this issue to the Fits viewer, since everything works fine as long as the Fits viewer is disabled. Any help on this issue is appreciated.
1 year 11 months ago #82313

Please Log in or Create an account to join the conversation.

Can you try this with KStars 3.5.9 beta?
1 year 11 months ago #82314

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 0
Jasem,

Thank you for replying to this thread. Can you please show me how to update Kstars to 3.5.9 Beta?

Carlos.
1 year 11 months ago #82315

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
Jasem,
What relevant changes were made in KStars 3.5.9 beta?
Just yesterday I updated a system which I didn't update for a couple of months.
I am on a Stable channel and got updated to SM 1.7 (from 1.6.2) and KStars 3.5.9 beta (04/01/22).
Not sure why KStars 3.5.9 beta came through as I am on a Stable channel.
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
1 year 11 months ago #82316

Please Log in or Create an account to join the conversation.

Depends on how you installed KStars. If Ubuntu, check here: indilib.org/get-indi/download-ubuntu.html

@Max: Hy made a change in FITS Viewer to possibly prevent a crash condition, so it might be helpful.
1 year 11 months ago #82317

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 0
Thank you again Jasem.

No, I am not using Ubuntu. I installed the Astroberry image on to my raspberry pi which came with Kstars. I then used Update/Upgrade from the command prompt to update to Kstars 3.5.8.

Carlos.
1 year 11 months ago #82318

Please Log in or Create an account to join the conversation.

Ok then you need for the next stable release.
1 year 11 months ago #82320

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 0
1 year 11 months ago #82321

Please Log in or Create an account to join the conversation.

Time to create page: 3.918 seconds