As I'm not using a DSLR at the moment I just bought a new ASI585MC camera; after not being recognized initially on my main RPi 4. I cloned that RPi4 Indi/Kstars image and updated to 1.9.6. The camera is now recognized, but will not expose. After reading a thread or two here indicating some concern with an upgrade and some potential package conflicts, I wiped that image and tried again with a fresh build, and am getting the same result. Interestingly the Live View will display a stream; this works while the indi logs indicate a failure (see attached). Exposure does not work at all. The only other cameras I had to test to validate Exo was not the issue were two Svbony cams, which did work as expected. The camera will also work in Oacapture, with no issues.
It's possible (I'm honestly expecting) that the reason this camera is not working is because it is a relatively new release as I've seen no mention of ASI585MCs in the wild, but as a sanity check can this be confirmed?
I'm using regularly a ASI533MC on Astroberry (32bits raspian based distro) without problems. Now I'm running a nightly from a two weeks ago and I've tested it successfully: the camera respond to temperature control, I can use different exposure times and the camera receives more light with more exposure (is day time here). It download the images and show it on the FITS viewer. So, for me is working as expected.
Unfortunately I was not, but the symptoms are the same after testing so the experience is consistent. To clarify: I'm still seeing the same behavior you are.
I do not have any issues while using the ZWO software on OSX. I'll wait it out a bit and try again in a few weeks as this is a new relatively new release. I would be curious if last year's ASI485 has the same issue as I've gone looking for instances of people using it under Ekos with the indi-asi driver and I don't see many if any.
Running astroberry on a Pi3B+ latest verison 2.0.4 and PC with latest Ekos/Kstars 3.6.0
My ASI585MC is not recognized in ekos, simply doesn't show up, while you other see it but can't start exposures. In my setup it doesn't show up at all.
ASI290MM works fine on the setup, as well as my D700 DSLR.
Any idea if a SW update will come with support for this new camera. Or anyone with a workaround?