×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Impossible to connect 2 QHYCCD

  • Posts: 12
  • Thank you received: 3
Thank you Jasem.
I still have the hope that the problem will go away when i attach a powered USB 2.0 Hub.
Still waiting that it will be delivered.

Thanx
Robert
6 years 7 months ago #18473

Please Log in or Create an account to join the conversation.

  • Posts: 12
  • Thank you received: 3
Just a thought...could it be that the qhy driver should be invoked with an argument that
specifies the USB port to use. If the driver is loaded only once (because of the same camera manufacturer)
the cameras are concurrenting for the same port or the second is not handled by the driver.
6 years 7 months ago #18482

Please Log in or Create an account to join the conversation.

  • Posts: 29
  • Thank you received: 5
I tried it after reading your message. It doesn't work either, sorry.

Bye

Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
6 years 7 months ago #18489

Please Log in or Create an account to join the conversation.

  • Posts: 29
  • Thank you received: 5
Is there an update to this issue?
Thanks
Luca
6 years 4 months ago #20914

Please Log in or Create an account to join the conversation.

QHY said they will have an update "Soon", so we'll see.
The following user(s) said Thank You: Luca Gervasi
6 years 4 months ago #20915

Please Log in or Create an account to join the conversation.

  • Posts: 29
  • Thank you received: 5
I'm starting to regret buying qhy...grrrr

Sent from my ASUS_Z00AD using Tapatalk
6 years 1 month ago #23342

Please Log in or Create an account to join the conversation.

I can connect to 2 QHYs just fine with the last INDI QHY driver. You're still having this problem?
6 years 1 month ago #23349

Please Log in or Create an account to join the conversation.

  • Posts: 51
  • Thank you received: 12
I can also connect a QHY5L-II-M and QHY163M at the same time. However, stability of the faster USB3 devices is questionable on the Raspberry Pi 3. My 163M likes to disconnect occasionally, and I suspect it is due to the high data transfer rate that the Pi cannot handle.
6 years 1 month ago #23356

Please Log in or Create an account to join the conversation.

  • Posts: 29
  • Thank you received: 5
Yes, still affected...
I updated today before starting acquiring.
This is the setup:
Camera:
QHY 5LII-M
QHY 183C
Packages:
qhy-firmware-1.1.1-3.1.noarch
indi-eqmod-bleeding-1.6.3-5.1.x86_64
lupinix-indi-bleeding-1.0-182.2.noarch
libqhy-1.1.1-3.1.x86_64
libindi-bleeding-1.6.3-4.1.x86_64
indi-qhy-bleeding-1.6.3-5.1.x86_64
6 years 3 weeks ago #23940

Please Log in or Create an account to join the conversation.

  • Posts: 51
  • Thank you received: 12
I found on my Rock64 that sometimes only my QHY5L-II-M would connect, and sometimes both it and my 163M would connect. When the 163M wouldn't connect, sometime shutting down indi, pulling and reinserting the 163M, and restarting indi would make it appear. I don't seem to have that specific issue with my RPi3 though.
6 years 3 weeks ago #23951

Please Log in or Create an account to join the conversation.

Please note that qhy-firmware package might interfere with libqhy package and cause problems. libqhy already installs all the required firmware.
The following user(s) said Thank You: Luca Gervasi
6 years 3 weeks ago #23968

Please Log in or Create an account to join the conversation.

  • Posts: 29
  • Thank you received: 5
I was not aware of that. Actually I have a udev rule that fxloads the firmware :(
I'll remove it and try right this night (if the sky is available :( )
Thanks!
6 years 3 weeks ago #23973

Please Log in or Create an account to join the conversation.

Time to create page: 1.171 seconds