Hello, I bought an ASI 1600 MM Pro cooled camera for Christmas. I could only test it yesterday because of the weather. Everything worked fine, except the
cooling system.When I turn on the cooling system by indicating a temperature to be reached, the fan turns on but the temperature does not drop. The cooling power gradually reaches 100%. Maybe a hardware problem ?
Another problem which concerns more specifically INDI, I wanted to activate in the control panel the debugging of the zwo camera, this one is deactivated immediately after its activation. indi-asi-dbg is installed (version 0.7~2018020202032307~ubuntu16.04.1)
I checked verbose, file, INDI, Capturer, alignment, Guide, Mount. I start INDI, I can enable ASI debug, but when I connect the camera, debug is disabled immediately
I use a 1600MM Pro with the latest INDI drivers without any issue. If you are not seeing it cool, I would suspect a hardware problem such as the temperature probe in the camera. You said you see the power increase, so that seems that the cooler itself may be working, but without the temperature probe giving you a temperature, you won't know. ASI does a good job of standing behind their products, so a repair/replace should not be an issue. Just not fun being down for a bit.
Later you said "it is working now". Was this just for the logging?