I have a 200D and it is not connecting to Indi, I have read and tried every bit of advice on this forum and I just can't get it to connect. I'm getting "No Cameras detected. Check power and make sure camera is not mounted by other programs and try again". The camera isn't mounted, it connects ok to my W10 laptop ok.

After you have connected the camera ( I am presuming USB as its an updated 100d ???) do a lsusb from the command line - does the camera show in the results ?



Note is the Canon 200d supported by Gphoto version in Indi ????

I have done lsusb and canon is showing ok, and when I disconnect it it doesn't show. I have checked INDI and 200D is in the list of supported cameras.

Have you followed this indilib.org/forum/ccds-dslrs/783-indi-dslrs-faq.html plus what is the Hardware,OS,length of USB cable and have you a log ?
To get log change to verbose ,file, CCD and indi !

I'm using a RPI3 running Ubuntu Mate 16.04.5 LTS (Xenial Xerus) 32-bit, I've tried it with a 1m and 2m usb lead, also direct and through a powered USB hub. Log attached. Thanks

sorry log is where ?

Plus you have gone thru the DSLR FAQ's ????

Nearly same set up as me - no USB hub needed . Dial set too "Manual" ???

Yes I've been through everything several times, I thought I'd attached logs

You log is saying its finding the Canon and is then waiting for you to connect the device via Start Indi in ekos(unless you ticked auto) - no errors in log Canon camera found ok
"[2018-11-02T17:08:07.410 GMT DEBG ][ org.kde.kstars.indi] - INDI server connected.
[2018-11-02T17:08:07.410 GMT DEBG ][ org.kde.kstars.indi] - Connection to INDI server is successful
[2018-11-02T17:08:07.430 GMT DEBG ][ org.kde.kstars.indi] - INDI Server: "2018-11-02T17:08:07: startup: /usr/bin/indiserver -v -p 7624 -f /tmp/indififod1b5e919 "
[2018-11-02T17:08:07.431 GMT DEBG ][ org.kde.kstars.indi] - INDI Server: "2018-11-02T17:08:07: listening to port 7624 on fd 3"
[2018-11-02T17:08:07.431 GMT DEBG ][ org.kde.kstars.indi] - INDI Server: "FIFO: start indi_canon_ccd"
[2018-11-02T17:08:07.431 GMT DEBG ][ org.kde.kstars.indi] - INDI Server: "FIFO: Starting driver indi_canon_ccd"
[2018-11-02T17:08:07.432 GMT DEBG ][ org.kde.kstars.indi] - INDI Server: "2018-11-02T17:08:07: Driver indi_canon_ccd: pid=6580 rfd=4 wfd=7 efd=8"
[2018-11-02T17:08:07.432 GMT DEBG ][ org.kde.kstars.indi] - INDI Server: "2018-11-02T17:08:07: Client 5: new arrival from 127.0.0.1:48046 - welcome!"
[2018-11-02T17:08:07.432 GMT DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2018-11-02T17:08:07.605 GMT DEBG ][ org.kde.kstars.indi] - INDI Server: "2018-11-02T17:08:07: Driver indi_canon_ccd: Number of cameras detected: 1."

Must be more to it than given in the log !!!!!!

where do I go from here?

Quick test to try is to run the "Native" Gphoto command from the command line www.gphoto.org/doc/manual/using-gphoto2.html it may provide more info - no starting kstars/ekos just a terminal window. Think there is a better command line with full debug example on Indi Forum - cant find it at the moment :-(

Checked all that and gphoto is recognising my camera, but INDI still isn't, I'll keep searching