×
INDI Library v1.8.6 Released (21 Aug 2020)

August 2020 release of INDI Library v1.8.6 introduces new drivers while providing fixes and improvements to existing devices and core framework.

ZWO ASI CAM are recognized but not connected

7 months 4 weeks ago
ggtux@gmx.net
Junior Boarder
Junior Boarder
Posts: 26
More
Topic Author
ZWO ASI CAM are recognized but not connected #48390
Hi,
I did it and changed also ports and everything.
Can you tell me please how to link photos in here? Most of the board block this feature.

Thanks Gun

Please Log in or Create an account to join the conversation.

7 months 4 weeks ago
ggtux@gmx.net
Junior Boarder
Junior Boarder
Posts: 26
More
Topic Author
ZWO ASI CAM are recognized but not connected #48400
Hey guys,

I set up my other RPi but a 4b with the current beta. It worked from the scratch. Both cameras come up. What I didn’t could test is the colaboration with the mount and the focuser. The cross check was the RPI3 on my desk inside. No chance it doesn’t connect or the protocol didn’t realized the connection.
I would like to show a couple of pics, but do not know how to. Can I provide a Dropbox link in here? I just try, ok

Gun

Please Log in or Create an account to join the conversation.

7 months 4 weeks ago
ggtux@gmx.net
Junior Boarder
Junior Boarder
Posts: 26
More
Topic Author
ZWO ASI CAM are recognized but not connected #48405
www.dropbox.com/s/nob2xfbytgy0rv5/Foto%2...9%2045%2011.jpg?dl=0
Please see this. Don’t worry about the ASIAIR. It is my RPi3 with StellarMate OS.

Please Log in or Create an account to join the conversation.

7 months 4 weeks ago
wvreeven
Supernova Explorer
Supernova Explorer
Posts: 1631
Karma: 8
More
ZWO ASI CAM are recognized but not connected #48411
Click the Go To Editor... link to the lower left of the reply box.

ASI6200 and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro
ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
Docerland
Junior Boarder
Junior Boarder
Posts: 31
More
ZWO ASI CAM are recognized but not connected #48481
Hi!
I have tested with an older Odroid and on that one my ASI1600MM connects without problems. On my newer Odroid it doesn't connect but the filter wheel which is connected through the camera works so it is definitely a driver issue.
Erland

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
wvreeven
Supernova Explorer
Supernova Explorer
Posts: 1631
Karma: 8
More
ZWO ASI CAM are recognized but not connected #48483
Does the older Odroid have an older version of KStars? if yes, what version is that?

ASI6200 and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro
ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
Docerland
Junior Boarder
Junior Boarder
Posts: 31
More
ZWO ASI CAM are recognized but not connected #48487
The older Odroid have version 3.3.2.

Please Log in or Create an account to join the conversation.

7 months 2 weeks ago
Lead_weight
Gold Boarder
Gold Boarder
Posts: 453
Karma: 4
More
ZWO ASI CAM are recognized but not connected #48796
I have just come across this exact problem on my RPi4. When I connect them directly to my Mac they work. Also, other ZWO cameras work (like the new 2600MC-Pro), but I can't get the 1600 to connect. Any solution here yet?

-Andrew
––––––––––
Mac Observatory - All about using the Mac for Astrophotography: www.macobservatory.com
Astrobin: www.astrobin.com/users/Lead_Weight/

Please Log in or Create an account to join the conversation.

7 months 2 weeks ago 7 months 2 weeks ago by Frank L.
Frank L
Fresh Boarder
Fresh Boarder
Posts: 19
More
ZWO ASI CAM are recognized but not connected #48807
Hi,
same case here ; RPI4 with Pegasus UPB, eqmod, and 3 zwo (294mcpro, 120mc, 224mc) recognized but not connected ; SM and kstars just updated on 3.4

I have changed the port (on the UPB and directly on the rpi4) , try a new config with autoscan (all ok) but my cams still not connected.


I tried by SM webmanager and kstars on my PC (Windows 3.9) ; exactly the same...no cams connected :(


All worked fine before the update.


Best

Please Log in or Create an account to join the conversation.

7 months 2 weeks ago
TerryMcK
Fresh Boarder
Fresh Boarder
Posts: 5
More
ZWO ASI CAM are recognized but not connected #48808
I am using a Pi4 with all the latest updates to today 01/02/2020 and my ZWO ASI120MM works ok.
However my ZWO ASI183MC-PRO, although recognised, when I try to connect to it using oacapture or CCDciel crashes both applications.

I'm not sure where the crash logs are as /var/logs/messages does not contain any log of the crash. Happy to submit logs if you can tell me where they are.

Terry

Please Log in or Create an account to join the conversation.

7 months 2 weeks ago
ggtux@gmx.net
Junior Boarder
Junior Boarder
Posts: 26
More
Topic Author
ZWO ASI CAM are recognized but not connected #48830
Hi,
Originally I started this thread. Since than I changed and or updated everything from laptop OS to RPIs OS versions. For now it works with RPI4 beta and stable but still not wit RPI3.
So I bought me another RPI4, but could not Test because of time.
I recognized an ASI CCD update from 1.5 to 1.6. But I could not select it from the list, I mean it was shown but not clickable.
Is Jasem or somebody else working on this issue?

Thanks in advance

GUnter

Please Log in or Create an account to join the conversation.

7 months 2 weeks ago
Lead_weight
Gold Boarder
Gold Boarder
Posts: 453
Karma: 4
More
ZWO ASI CAM are recognized but not connected #48831

ggtux@gmx.net wrote: Hi,
Originally I started this thread. Since than I changed and or updated everything from laptop OS to RPIs OS versions. For now it works with RPI4 beta and stable but still not wit RPI3.
So I bought me another RPI4, but could not Test because of time.
I recognized an ASI CCD update from 1.5 to 1.6. But I could not select it from the list, I mean it was shown but not clickable.
Is Jasem or somebody else working on this issue?

Thanks in advance

GUnter


Mine stopped working on the RPi4 running stellar mate 1.5. I just flashed and updated to 1.6 and it's working fine now. Kind of sucks to have had to do that, but at least it's working. Strange that it had been working fine, then all of a sudden it stopped. It must have been one of the software updates that broke it.

-Andrew
––––––––––
Mac Observatory - All about using the Mac for Astrophotography: www.macobservatory.com
Astrobin: www.astrobin.com/users/Lead_Weight/

Please Log in or Create an account to join the conversation.

Time to create page: 1.145 seconds