×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Camera Guide problem with Ekos

  • Posts: 2
  • Thank you received: 0
Hello Everyone, it is my first experience with INDI system and I have a problem with guide camera (ASI120MM-S).
When the mount (CEM40) is connected the guide camera doesn't work, if I disconnect the mount the camera work.
Now, to resolve the problem I'am using the guide camera with PHD2, but I would use the the guide inside INDI system.
Do you have advice ?
Thanks in advance and Clear Skies.

Massimo
4 years 2 months ago #48407

Please Log in or Create an account to join the conversation.

  • Posts: 1957
  • Thank you received: 420
Hi,

Can you post verbose debug logs for when both the camera and mount are connected so we can have a look at the problem?


Wouter
4 years 1 month ago #49631

Please Log in or Create an account to join the conversation.

  • Posts: 32
  • Thank you received: 6

Replied by Ryan on topic Camera Guide problem with Ekos

I’m having a similar issue with an ASI120mm-s. My work around - when I first start up if I go to the capture tab, select the ASI120mm-s, then turn on live stream. Once the live stream starts I am then able to turn it off, go into the guide module, and the camera works fine.
4 years 1 month ago #49643

Please Log in or Create an account to join the conversation.

Time to create page: 0.186 seconds