´╗┐
×

INDI Library v1.9.8 Released (29 Sep 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

ZWO ASI 6200 loses connection to INDI server.

  • Posts: 1
  • Thank you received: 0
Hi all

I'm new to Indi. I run the following configuration:
Ubuntu 18.04.3 on a RPI3.
Kstars 3.3.9

My ASI1600 works perfectly with Ekos but I can not get the 6200 to download frames.
The 6200 connects just fine but when I try to take an exposure, during download I get the following error message: "Connection to INDI host at localhost on port 7626 lost. Server disconnected."

Has anyone encountered this? Any suggestions on how to fix it?

Thank you!
2 years 10 months ago #48636

Please Log in or Create an account to join the conversation.

  • Posts: 1942
  • Thank you received: 418
Hi,

Try the new 3.4.0 version. It has a newer ASI driver that should fix the problem.


HTH, Wouter
Wouter van Reeven

ASI6200MM and 7 slot 2" filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro
ASI1600MM-Pro Cooled and 5 slot 1.25" filter wheel with an 8" TS Ritchey-Chr├ętien on a SkyWatcher EQ6-R
2 years 9 months ago #49630

Please Log in or Create an account to join the conversation.

  • Posts: 10
  • Thank you received: 0
I think I am seeing this same problem if i use the BLOB to get the frame, I am using the latest INDI and 3rd Party from GIT (as of this morning). If I use the Blob response I get a server disconnected message. If I instead read the file off the disk that is fine though as it appears and is valid. I just can't seem to just receive the raw data, not sure if its too big and causing a crash in the drive? I am doing RAW16 and no binning so the FITS is 120MB.
2 years 5 months ago #56211

Please Log in or Create an account to join the conversation.

Try increasing how much MB it is allowed to lag.
indiserver -m 300 ....

Would set it to 300MB up from default 128MB.
Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info
2 years 5 months ago #56220

Please Log in or Create an account to join the conversation.

  • Posts: 10
  • Thank you received: 0
Awesome that fixed it, thanks so much!
2 years 5 months ago #56224

Please Log in or Create an account to join the conversation.

Time to create page: 0.568 seconds