×

INDI Library v1.9.8 Released (29 Sep 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

Driver for Raspberry Pi "High Quality Camera?"

  • Posts: 48
  • Thank you received: 12
Oh, ok. That was interesting for sure. Ill see if I can find anything there.
Thanks, Lars
1 year 10 months ago #66429
The topic has been locked.
  • Posts: 48
  • Thank you received: 12
Ok, done some testing today. Neither burst mode or hard setting a mode seems to help. Also I see that when I use raspistill to get a 5 s exposure it can take up to 45 seconds. That is really strange I think.
1 year 10 months ago #66444
The topic has been locked.
  • Posts: 43
  • Thank you received: 10
Yeah. That one had me stumped for a while. Seems that raspistill will go through several frames (around 7 of them) before it presents the final frame to the user. Each frame is the length of the exposure time that has been set. That is the very reason for implementing raspiraw in my driver after attempting to use raspistill.
1 year 10 months ago #66454
The topic has been locked.
  • Posts: 12
  • Thank you received: 1
Did you try the raspistill line I posted earlier?

For me, as written, the image is saved after about 1 second longer than the set exposure length. ie for a 5 second it takes 6.
If I remove the -bm, it gets a little longer.
if I remove -ex off, it does indeed get very much longer.
1 year 10 months ago #66460
The topic has been locked.
  • Posts: 48
  • Thank you received: 12
You mean this: raspistill -t 1 -md 3 -bm -ex off -ag 1 --shutter 200000 -ISO 800 -st -o /home/astroberry/Desktop/long.jpg
Its a 0.2 s exosure, I have not had problems with that before.
1 year 10 months ago #66525
The topic has been locked.
  • Posts: 12
  • Thank you received: 1
sorry, I pasted a random line. I can adjust the --shutter right up to 10's of seconds.

That short exposure came from an experiment I did, changing the exposure length up in steps and looking at the histogram to make sure the actual image was getting stronger.
Last edit: 1 year 10 months ago by Keith Venables.
1 year 10 months ago #66526
The topic has been locked.
  • Posts: 48
  • Thank you received: 12
Just to make sure, when you say the image exposure does not change. You have turned of the stretch-button in the FITS-viewer then, otherwise the stretch function will normalize the exposure, with more or less noise as a side-effect.
1 year 9 months ago #67040
The topic has been locked.
  • Posts: 12
  • Thank you received: 1
Yes - that can be a distraction!

I'm finding that if I start EKOS and go straight to the camera exposure tab, change gain first to anything 1 or higher, then change exposure to something long. It will give me a true long exposure straight away, and carry on doing so for the session.

Ive found you must not touch the exposure before the gain, as the moment exposure has been entered, a test image is captured automatically, which prevents future long exposures.

The command line I gave before still continues to be 'foolproof'.
1 year 9 months ago #67041
The topic has been locked.
  • Posts: 12
  • Thank you received: 1
ps:

A load of messages I tried to post a month ago, suddenly appeared overnight.
1 year 9 months ago #67042
The topic has been locked.
  • Posts: 4
  • Thank you received: 0
I wrote that weeks ago.

Tino
1 year 9 months ago #67043
The topic has been locked.
  • Posts: 48
  • Thank you received: 12

Ok, ill try more with that input, sorry but Im a bit of work spare time now adays so its moving a bit slow.
The following user(s) said Thank You: Keith Venables
1 year 9 months ago #67128
The topic has been locked.
  • Posts: 12
  • Thank you received: 1
Many thanks,
If there is anything I can do to help - tests, characterisation etc? Just ask.
Being retired I have no time excuses!
1 year 9 months ago #67135
The topic has been locked.
Time to create page: 0.730 seconds