Bi-monthly release with minor bug fixes and improvements
2020-08-08T05:35:00: Driver indi_asi_ccd: read setNumberVector ZWO CCD ASI130MM CCD_EXPOSURE Busy
CCD_EXPOSURE_VALUE='0.39606595039367675781'
2020-08-08T05:35:00: Client 0: queuing <setNumberVector device='ZWO CCD ASI130MM' name='CCD_EXPOSURE'>
2020-08-08T05:35:00: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="ZWO CCD ASI130MM" name="CCD_EXPOSURE" state="Busy" timeout="60" timestamp="2020-08-08T05:35:00">
<oneNumber name="CCD_EXPOSURE_VALUE">
0.39606595039367675781
</oneNumber>
</setNumberVector>
2020-08-08T05:35:00: Driver indi_asi_ccd: read setNumberVector ZWO CCD ASI130MM CCD_EXPOSURE Busy
CCD_EXPOSURE_VALUE='0.29578900337219238281'
2020-08-08T05:35:00: Client 0: queuing <setNumberVector device='ZWO CCD ASI130MM' name='CCD_EXPOSURE'>
2020-08-08T05:35:00: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="ZWO CCD ASI130MM" name="CCD_EXPOSURE" state="Busy" timeout="60" timestamp="2020-08-08T05:35:00">
<oneNumber name="CCD_EXPOSURE_VALUE">
0.29578900337219238281
</oneNumber>
</setNumberVector>
2020-08-08T05:35:00: Driver indi_asi_ccd: read setNumberVector ZWO CCD ASI130MM CCD_EXPOSURE Busy
CCD_EXPOSURE_VALUE='0.19559407234191894531'
2020-08-08T05:35:00: Client 0: queuing <setNumberVector device='ZWO CCD ASI130MM' name='CCD_EXPOSURE'>
2020-08-08T05:35:00: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="ZWO CCD ASI130MM" name="CCD_EXPOSURE" state="Busy" timeout="60" timestamp="2020-08-08T05:35:00">
<oneNumber name="CCD_EXPOSURE_VALUE">
0.19559407234191894531
</oneNumber>
</setNumberVector>
2020-08-08T05:35:01: Driver indi_asi_ccd: read setNumberVector ZWO CCD ASI130MM CCD_EXPOSURE Busy
CCD_EXPOSURE_VALUE='0.095390081405639648438'
2020-08-08T05:35:01: Client 0: queuing <setNumberVector device='ZWO CCD ASI130MM' name='CCD_EXPOSURE'>
2020-08-08T05:35:01: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="ZWO CCD ASI130MM" name="CCD_EXPOSURE" state="Busy" timeout="60" timestamp="2020-08-08T05:35:01">
<oneNumber name="CCD_EXPOSURE_VALUE">
0.095390081405639648438
</oneNumber>
</setNumberVector>
2020-08-08T05:35:01: Driver indi_asi_ccd: read message ZWO CCD ASI130MM '[ERROR] Exposure failed after 3 attempts.'
2020-08-08T05:35:01: Client 0: queuing <message device='ZWO CCD ASI130MM' name=''>
2020-08-08T05:35:01: Client 0: sending msg copy 1 nq 1:
<message device="ZWO CCD ASI130MM" timestamp="2020-08-08T05:35:01" message="[ERROR] Exposure failed after 3 attempts."/>
2020-08-08T05:35:01: Driver indi_asi_ccd: read setNumberVector ZWO CCD ASI130MM CCD_EXPOSURE Alert
CCD_EXPOSURE_VALUE='0.095390081405639648438'
2020-08-08T05:35:01: Client 0: queuing <setNumberVector device='ZWO CCD ASI130MM' name='CCD_EXPOSURE'>
2020-08-08T05:35:01: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="ZWO CCD ASI130MM" name="CCD_EXPOSURE" state="Alert" timeout="60" timestamp="2020-08-08T05:35:01">
<oneNumber name="CCD_EXPOSURE_VALUE">
0.095390081405639648438
</oneNumber>
</setNumberVector>
Please Log in or Create an account to join the conversation.
"[2020-08-08 06:45:20.571]" - "ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_TIMEOUT"
ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_TIMEOUT
"[2020-08-08 06:45:20.862]" - "Set camera param, Name: zoom out, Value: 0"
Set camera param, Name: zoom out, Value: 0
"[2020-08-08 06:45:21.299]" - "Stop the timer of device change, check and upate camera list"
Stop the timer of device change, check and upate camera list
"[2020-08-08 06:45:21.361]" - "ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_TIMEOUT"
"[2020-08-08 06:45:21.571]" - "ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED"
"[2020-08-08 06:45:21.576]" - "1 cameras detected"
1 cameras detected
"[2020-08-08 06:45:21.609]" - "ZWO ASI130MM(ID:0) was detected."
ZWO ASI130MM(ID:0) was detected.
"[2020-08-08 06:45:21.609]" - "Set action: 1"
Set action: 1
"[2020-08-08 06:45:21.609]" - "Start to save camera settings to config file"
Start to save camera settings to config file
"[2020-08-08 06:45:21.671]" - "ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED"
"[2020-08-08 06:45:21.772]" - "ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED"
"[2020-08-08 06:45:21.872]" - "ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED"
"[2020-08-08 06:45:21.972]" - "ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED"
"[2020-08-08 06:45:22.073]" - "ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED"
"[2020-08-08 06:45:22.173]" - "ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED"
"[2020-08-08 06:45:22.214]" - "Save camera settings completed"
Save camera settings completed
"[2020-08-08 06:45:22.216]" - "Stop to capture of camera 0"
Stop to capture of camera 0
"[2020-08-08 06:45:22.216]" - "Prepare to stop ImageCaptureThread(Camera ID:0)"
Prepare to stop ImageCaptureThread(Camera ID:0)
"[2020-08-08 06:45:22.216]" - "ImageCaptureThread is running(Camera ID:0)"
ImageCaptureThread is running(Camera ID:0)
"[2020-08-08 06:45:22.216]" - "Wait for ImageCaptureThread::run while loop(Camera ID:0)"
Wait for ImageCaptureThread::run while loop(Camera ID:0)
ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_TIMEOUT
ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED
ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED
ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED
ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED
ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED
ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED
ASIGetVideoData : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED
"[2020-08-08 06:45:22.273]" - "exit ImageCaptureThread::run(Camera ID:0)"
"[2020-08-08 06:45:22.274]" - "ImageCaptureThread::run jumped while loop(Camera ID:0)"
ImageCaptureThread::run jumped while loop(Camera ID:0)
The qDebug() was added to avoid carash. The reason is unexplained.
"[2020-08-08 06:45:22.274]" - "ASIStopVideoCapture : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED"
ASIStopVideoCapture : Error ocurrs, the error code is : ASI_ERROR_CAMERA_CLOSED
"[2020-08-08 06:45:22.274]" - "ImageCaptureThread stopped successfully(Camera ID:0)"
ImageCaptureThread stopped successfully(Camera ID:0)
exit ImageCaptureThread::run(Camera ID:0)
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.