×
INDI Library v1.8.7 Released (21 Nov 2020)

Nov. 2020 Release brings significant improvements to streaming and recording videos. Support for new drivers including Estatto focuser and Pegasus falcon rotator.

indi_canon_ccd crash: latest update

3 months 1 week ago
kbahey
Gold Boarder
Gold Boarder
Posts: 213
Karma: 2
More
indi_canon_ccd crash: latest update #58669
Never mind ...

Just got the new packages from the PPAs for 18.04.
They use libraw20 for kstars-bleeding, and remove libraw19, so all is good now.

Will test tonight.

Please Log in or Create an account to join the conversation.

3 months 1 week ago
dhanushx012
Fresh Boarder
Fresh Boarder
Posts: 1
More
indi_canon_ccd crash: latest update #58670
I also have this problem, if someone has a solution, please tell me

Please Log in or Create an account to join the conversation.

3 months 1 week ago 3 months 1 week ago by Cerro Torre.
Cerro Torre
Senior Boarder
Senior Boarder
Posts: 78
More
indi_canon_ccd crash: latest update #58672
Hi kbahey,

my Astro NUC is driven by Ubuntu Mate 20.04 - because of the terrible weather in central Europe I built this device in the last few days. It is controlled over my network via vncserver.
Until now it has not seen the stars.

My workhorse is my Raspberry Pi4 with Stellarmate OS, which is a formidable fallback.
I would be pleased to see Jasem putting together Stellarmate OS for x86-64 PCs.

Powered by

GNU / Linux
KDE neon
KStars | EKOS | INDI

and some cheap hardware

Please Log in or Create an account to join the conversation.

3 months 1 week ago
wvreeven
Supernova Explorer
Supernova Explorer
Posts: 1752
Karma: 8
More
indi_canon_ccd crash: latest update #58700
Doesn't work for me. I uninstalled kstars etc using
sudo dpkg -P indi-full indi-gphoto indi-pentax kstars-bleeding kstars-bleeding-dbg libraw19 libraw-dev
and then tried to reinstall using
sudo apt-get update && sudo apt-get -y install indi-full indi-gphoto indi-pentax kstars-bleeding kstars-bleeding-dbg libraw20
and I get
The following packages have unmet dependencies:
 indi-gphoto : Depends: libraw19 (>= 0.19.0) but it is not going to be installed
 indi-pentax : Depends: libraw19 (>= 0.16.0) but it is not going to be installed
 kstars-bleeding : Depends: libraw19 (>= 0.16.0) but it is not going to be installed

This is on Ubuntu (server) 20.04 on a Raspberry Pi 4 with 4 Gb of memory.


Wouter

Wouter van Reeven

ASI6200 and 7 slot 2" filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro
ASI1600MM-Pro Cooled and 5 slot 1.25" filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

3 months 1 week ago 3 months 1 week ago by wvreeven.
wvreeven
Supernova Explorer
Supernova Explorer
Posts: 1752
Karma: 8
More
indi_canon_ccd crash: latest update #58702
I forgot to add: that is with the nightly builds. If I do
sudo apt-get update && sudo apt-get -y install indi-full indi-gphoto indi-pentax kstars-bleeding kstars-bleeding-dbg libraw19
then all goes well.

Wouter

Wouter van Reeven

ASI6200 and 7 slot 2" filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro
ASI1600MM-Pro Cooled and 5 slot 1.25" filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

3 months 1 week ago 3 months 1 week ago by plop3.
plop3
Junior Boarder
Junior Boarder
Posts: 31
More
indi_canon_ccd crash: latest update #58706
I use Ubuntu 20.04 and it also use too libraw19.
I cannot install kstars-bleeding with libraw20 without breaking my distro.

Please Log in or Create an account to join the conversation.

3 months 1 week ago
wvreeven
Supernova Explorer
Supernova Explorer
Posts: 1752
Karma: 8
More
indi_canon_ccd crash: latest update #58714
Funny enough the distro doesn't need libraw19. But kstars-bleeding seems to do so.


Wouter

Wouter van Reeven

ASI6200 and 7 slot 2" filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro
ASI1600MM-Pro Cooled and 5 slot 1.25" filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

3 months 1 week ago
alacant
Platinum Boarder
Platinum Boarder
Posts: 665
Karma: 1
More
Topic Author
indi_canon_ccd crash: latest update #58718

that is with the nightly builds


Hi
It builds fine against libraw20.
Cheers,
Steve

kubuntu 20.04
700d, eq6, t7m

Please Log in or Create an account to join the conversation.

3 months 1 week ago
kbahey
Gold Boarder
Gold Boarder
Posts: 213
Karma: 2
More
indi_canon_ccd crash: latest update #58719
I just upgraded from the stable PPA, and it uninstalled libraw19 and replaced it with libraw20, as well as kstars-bleeding that is linked to the latter.

Tested under the stars yesterday and all works as designed.

Thanks knro.

Please Log in or Create an account to join the conversation.

3 months 1 week ago 3 months 1 week ago by plop3.
plop3
Junior Boarder
Junior Boarder
Posts: 31
More
indi_canon_ccd crash: latest update #58736
For me it's not possible.
I use my laptop for another usages.
I can't remove Siril, Krita Gthumb and Gimp (and others).

Please Log in or Create an account to join the conversation.

3 months 1 week ago
kbahey
Gold Boarder
Gold Boarder
Posts: 213
Karma: 2
More
indi_canon_ccd crash: latest update #58738

plop3 wrote: For me it's not possible.
I use my laptop for another usages.
I can't remove Siril, Krita Gthumb and Gimp (and others).


I already have Krita installed, and there is no conflict.
For gthumb, there is also no conflict:
# apt install gthumb
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  brasero-common cdrdao dvd+rw-tools growisofs gthumb-data libbrasero-media3-1 libgmime-3.0-0 libperl4-corelibs-perl
  libtotem-plparser-common libtotem-plparser18
Suggested packages:
  cdrskin gstreamer1.0-fluendo-mp3
The following NEW packages will be installed
  brasero-common cdrdao dvd+rw-tools growisofs gthumb gthumb-data libbrasero-media3-1 libgmime-3.0-0 libperl4-corelibs-perl
  libtotem-plparser-common libtotem-plparser18
0 to upgrade, 11 to newly install, 0 to remove and 0 not to upgrade.
Need to get 5,388 kB of archives.
After this operation, 26.0 MB of additional disk space will be used.
Do you want to continue? [Y/n]

Siril is possible to install too.
# apt install siril
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  gdal-data libarmadillo8 libarpack2 libcharls1 libconfig9 libdap25 libdapclient6v5 libepsilon1 libffms2-4 libfreexl1 libfyba0 libgdal20
  libgdcm2.8 libgeos-3.6.2 libgeos-c1v5 libgeotiff2 libhdf4-0-alt libkmlbase1 libkmldom1 libkmlengine1 libnetcdf13 libodbc1 libogdi3.2
  libopencv-calib3d3.2 libopencv-core3.2 libopencv-features2d3.2 libopencv-flann3.2 libopencv-highgui3.2 libopencv-imgcodecs3.2
  libopencv-imgproc3.2 libopencv-ml3.2 libopencv-videoio3.2 libpq5 libproj12 libqhull7 libsocket++1 libspatialite7 libsuperlu5 libtbb2
  liburiparser1 libxerces-c3.2 odbcinst odbcinst1debian2 proj-bin proj-data
Suggested packages:
  geotiff-bin gdal-bin libgeotiff-epsg libhdf4-doc libhdf4-alt-dev hdf4-tools libmyodbc odbc-postgresql tdsodbc unixodbc-bin ogdi-bin
  gnuplot
The following NEW packages will be installed
  gdal-data libarmadillo8 libarpack2 libcharls1 libconfig9 libdap25 libdapclient6v5 libepsilon1 libffms2-4 libfreexl1 libfyba0 libgdal20
  libgdcm2.8 libgeos-3.6.2 libgeos-c1v5 libgeotiff2 libhdf4-0-alt libkmlbase1 libkmldom1 libkmlengine1 libnetcdf13 libodbc1 libogdi3.2
  libopencv-calib3d3.2 libopencv-core3.2 libopencv-features2d3.2 libopencv-flann3.2 libopencv-highgui3.2 libopencv-imgcodecs3.2
  libopencv-imgproc3.2 libopencv-ml3.2 libopencv-videoio3.2 libpq5 libproj12 libqhull7 libsocket++1 libspatialite7 libsuperlu5 libtbb2
  liburiparser1 libxerces-c3.2 odbcinst odbcinst1debian2 proj-bin proj-data siril
0 to upgrade, 46 to newly install, 0 to remove and 0 not to upgrade.
Need to get 20.3 MB of archives.
After this operation, 82.3 MB of additional disk space will be used.
Do you want to continue? [Y/n]
Gimp 2.8, the standard version from the repo, is possible:
# apt install gimp
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  gimp-data libamd2 libbabl-0.1-0 libcamd2 libccolamd2 libcholmod3 libgegl-0.3-0 libgimp2.0 libmetis5 libumfpack5
Suggested packages:
  gimp-help-en | gimp-help gimp-data-extras
The following NEW packages will be installed
  gimp gimp-data libamd2 libbabl-0.1-0 libcamd2 libccolamd2 libcholmod3 libgegl-0.3-0 libgimp2.0 libmetis5 libumfpack5
0 to upgrade, 11 to newly install, 0 to remove and 0 not to upgrade.
Need to get 14.1 MB of archives.
After this operation, 72.0 MB of additional disk space will be used.
Do you want to continue? [Y/n]

Unless you want the GIMP beta, which has 32-bit support, and in that case you need other repos.

Please Log in or Create an account to join the conversation.

3 months 1 week ago
plop3
Junior Boarder
Junior Boarder
Posts: 31
More
indi_canon_ccd crash: latest update #58739
Very strange. It's Ubuntu 20.04 ?

Please Log in or Create an account to join the conversation.

Time to create page: 0.657 seconds