For some unknown reason my old faithful ASI 120 MM USB 2 refuses to capture. The EKos recognises and all data is OK. It has been awhile ( about year or so) when I used last time. I had QHY 462 but tonight I tried guiding with ASI 120 via ASI 1600MMPro. Also switched directly to Raspberry 4, but didn't make any difference. Please view the video www.dropbox.com/s/ijmsqx6zm2wy4we/Capture%2002.wmv?dl=0
Any solutions or ideas?
The ASI120 is no longer supported by ASI, and so no longer works with Kstars / Ekos....sorry....
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
On top of that, the ASI120MM is not supported by any OS that I know of of up to 5 years old and sometimes even older. However, there is a compatible firmware that the camera can be flashed with and then you may be lucky and get it to work at 8 bit. I have tried this myself several years ago but to no avail and I have switched to the USB3 ASI120MM-S. FYI this has been discussed MANY times on this form so if you search on internet you're bound to find several of those discussions.
Wouter van Reeven
ASI6200MM and 7 slot 2" filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro
ASI1600MM-Pro Cooled and 5 slot 1.25" filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R