I succeeded to have a TimeOut Field an it seems to work.
Have a little bit more trouble finding out how to get telescope stratus but it's on the way.
After some tests it seems working well when I set the time slightly over the time required by OnStep (may test fiirmware is an Arduino Mega so is slow).
When I reduce the time, I get the timeout and after third trial it goes to abort
here the screenshot of the modified interface.
I will do more tests tomorrow and also try so have the entered values saved for later reuse.
Meridian Flip is njow wotking with Onstep, thanks to Wolfgang Reissenberger and some other that patched KStars.
Basically no more Timeout but rather chnaged the way meridian flip is triggered.
Now meridian flip is managed by the mount so it becomes independent from Capture.
It might be confusing on the first viewbecause now there are two places where stup can be done:
- in the Capture tab
- and in the mount tab
The mount tab has priority in the sense that if one sets the meridian flip in the mount tab it is executed even if no capture is running.
If one set the meridian flip in the Capture tad, then as soon the captue sequence is started, the settings are transposed to the Mount tab (Time and checkbox)
In the mount box there is additionally a countdown field that shows status of meridian flip right under the setpoint.
It needs a bit experimentation with it but it is working fine.
First set Capture
I cannot answer, I have no Mac.
But as far I can see on www.indilib.org/download/osx.html the latest update is from 2017, so I don't see grat chance for you to get a daily built.
Seems the dmg file is for KStars 3.0.0 not a 3.1.0
So First update on the modification meridian Flip , First tests works. So really Cool
some question i have still
- Where can i set that it automatically does Align, Calibrated Guiding start guiding, and refocus before it starts again with the exposure sequence, as show in the Jasem video
-Secondly must there be defintion of the HA in Schedulare Tab also?