×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Driver OnStep (LX200 like) for INDI

  • Posts: 322
  • Thank you received: 31
That last problem of wrong pointing, and probably the crash, has to do with parking.

I pressed "Purge data" from Site Management -> Park Options, slewed to Arcturus, then Altair, then told it Return Home, and all worked as it should.

So there is a separate issue that is related to parking.
2 years 4 months ago #77732

Please Log in or Create an account to join the conversation.

  • Posts: 322
  • Thank you received: 31
More iterations of testing with "return home" after Park data was purged, show everything working normally. No crashes.

So it has something to do with Parking, which is not part of my actual workflow since I don't have an observatory.
2 years 4 months ago #77734

Please Log in or Create an account to join the conversation.

  • Posts: 452
  • Thank you received: 71
Khalid,

I tried the "Purge" methos but still have the jumps when Parking / Unparking.

In the meantime I did try to start a list of all the LX200 commands github.com/azwing/OnStep_Commands
It is really a start but more complete that the Wiki and IO still miss a bunch of commands.
Since I am blocked for hardware reason ...
2 years 4 months ago #77741

Please Log in or Create an account to join the conversation.

  • Posts: 322
  • Thank you received: 31
After I purged, I never parked. Just "return home", and everything was normal.

So my scenario is different that yours.

There is still a bug that happens after parking (wrong coordinates reported in KStars, but not in other client applications) and crashing.

I think the crashing is related to the wrong coordinates somehow.

The puzzle is what happens after parking that triggers all this. It is not parking itself, but something following or relating to it.
2 years 4 months ago #77743

Please Log in or Create an account to join the conversation.

  • Posts: 148
  • Thank you received: 19
Khalid - can you crash at will? if so humour me here - as you know I have a number of systems and under constant settings and conditions I randomly crash...BUT I have found if I turn off logging completely I do not randomly crash - Your crash on park may not be the park process but LOGGING about the park process - every crash I get is related somehow to Q lib(either io or audio) so my suspicion is that the the values used in motion and parking blow up when being logged - if you can replicate you crash, try a few time with no logging turned on - it would almost verify my theory....I am too random to verify
2 years 4 months ago #77744

Please Log in or Create an account to join the conversation.

  • Posts: 322
  • Thank you received: 31
Not really 'at will'. It takes some 5 minutes or so after I park, and after the coordinates are different from what OnStep actually reports, then it crashes.

I will park and see if it happens again.
2 years 4 months ago #77745

Please Log in or Create an account to join the conversation.

  • Posts: 322
  • Thank you received: 31
My log verbosity is 'regular'.

The park function works normally initially (except for that jump that Alain reported. I see it too).
There is no crash (at least for a few minutes).

Then I unparked, then slew to the other side of the meridian. All normal.

Then issued a park command and waited for maybe 10 minutes and it did not happen.

Now that I try to remember, the crash happened the next day from trying to park. Maybe because the position was under the horizon (or so INDI thought it was).

Will leave it like that, and test tomorrow.

Sorry, nothing definitive here.
2 years 4 months ago #77748

Please Log in or Create an account to join the conversation.

  • Posts: 452
  • Thank you received: 71
Khalid,

I try to setup different configuration with the hardware I have available (Bluepill / Arduino-Mega / Fysetc S6 / Max PCB2)
Not thaty I beleive the errors come from different platforms, it is just because this is what I have to set-up different scenarii.
(With / Without Focuser, Rotator, Equatorial vs Altaz ...)

I could not do all since I have still no soldering iron, but was able to set-up an Arduino Mega 2560 with flying wires.

just to see if my thoughts are correct:
In therory:
1) -If I connect to Serial (via usb-serial dongle) dedicated to WiFi I should be able to connect with Indi or terminal and send commands / receive responses, correct?
2) - If I use an Arduino Mega 2560 I connect my ESP8266 Rx/Tx to serial 1, correct?

If I try (1) I still have sometimes errors that I don't have via standard USB
If I try (2) I have some other errors: (with kstars of with python script)
a) I cannot connect at all
b) I can connect but after a while all is blocked
c) I have the message "Serial Interface to OnStep is Down!" in the Web browser
Last edit: 2 years 4 months ago by Alain Zwingelstein.
2 years 4 months ago #77768

Please Log in or Create an account to join the conversation.

  • Posts: 161
  • Thank you received: 39
WARNING: MEGA2560 IS 5V, ESP8266 IS LIKELY NOT 5V TOLERANT.

Use a voltage divider there, or it may fry it. (Some boards are, some are not, and the chip may have some extra tolerance on that pin, per a post by one of the esp people, but not to rely on it.)
2 years 4 months ago #77770

Please Log in or Create an account to join the conversation.

  • Posts: 452
  • Thank you received: 71
Thanks for the advice.
I have a divider mounted ...
2 years 4 months ago #77775

Please Log in or Create an account to join the conversation.

  • Posts: 322
  • Thank you received: 31
I don't have an answer for how to connect an Arduino.

But the Wiki for RAMPS should have the info (indirectly)

onstep.groups.io/g/main/wiki/3996
2 years 4 months ago #77777

Please Log in or Create an account to join the conversation.

  • Posts: 144
  • Thank you received: 7
Good all friends is possible to crash versione 1.9.3 in wifi?
Regards
Ettore
 
2 years 4 months ago #77881

Please Log in or Create an account to join the conversation.

Time to create page: 0.773 seconds