I'm developing software (mountwizzard) using some devices on INDI. As I'm only own a version 1 powerboat I would be happy if somebody could tell, how to distinguish the two versions and please make a debug log with usage of Dew heaters / Auto Dew etc. that I get the actual used INDI properties.
If there is another way the get these, I'm very thankful.
Secondly I experienced that for example ZWO ASI using a single driver (like QSI does), but when a camera is connected the name property of the driver changes to the attached camera. As I don't want to get the full traffic, I only would like to watch the traffic of the camera, I need the name string the driver (server) will use. In EKOS I choose ZWO CCD, but then I get in the control panel only the attached camera name.
@ Jasem: I think you open the INDI link and filter for CCD's and than got the name the driver is using.
I can supply logs for the PowerBox V2 as I have that. It reports temp and dew point, but not atmospheric pressure. So I have the MBox connected for weather information in MountWizard. I will have the mount out tonight, so I'll try to capture a log.
Many thanks, as you have MW4 for test anyhow I would implement some v2 feature there and you could test. So right now there should be the third dew heater already available if you upgrade within MW4 to the latest version.
not exactly a Dome but a Roll Off Roof. Domes and Roofs share the same base class but Roofs have only Park / Unpark (i.e. open / close) features.
If this is enough for a test, happy to help.