This is my first obsy build and works fine for my needs, it’s a 5’ square converted shed, and holds my EQ8 mount and side by side dual Tak set up, with RPI running Stellarmate for full image capture and mount control.
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
Not at all as the pier height takes the scope high enough to clear the walls, besides the surrounding houses block out the sky before the shed walls, and it’s 5 foot square more than enough room for my Tak FSQ85 to move around...I agree it does look a bit smaller on the video that it actually is....??
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
Thanks,
no we have had very strong winds and rain lately and it’s all as dry as a bone....seems to have worked extremely well indeed....
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes