×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Indi support for Meade LS (Autostar III) series

  • Posts: 3
  • Thank you received: 0
I do not.
The telescope is the only thing plug into the pi now. Pi is running raspbian with kernel version: 4.19.97-v7l+
lsusb yields:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 04cc:0000 ST-Ericsson
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Plugging in the telescope yields the following messages:
[589295.060198] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
[589295.191367] usb 1-1.4: New USB device found, idVendor=04cc, idProduct=0000, bcdDevice= 2.30
[589295.191383] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[589295.191396] usb 1-1.4: Product: Meade eFinder Serial Emulator
[589295.191409] usb 1-1.4: Manufacturer: Meade
[589295.191420] usb 1-1.4: SerialNumber: 1234567890
[589295.201512] cdc_acm 1-1.4:1.0: Zero length descriptor references
[589295.201541] cdc_acm: probe of 1-1.4:1.0 failed with error -22
4 years 1 week ago #50863
The topic has been locked.
  • Posts: 2
  • Thank you received: 0
Hi All,

I try to connect INDI (o Raspberry Pi) to my ETX-LS and after reading this post I try to compile cdc-acm driver (it is not very simple). Have you another new since your last post in order to solve easier this 'problem'

Regards
Last edit: 2 years 3 months ago by Barrallier.
2 years 3 months ago #78523
The topic has been locked.
  • Posts: 1
  • Thank you received: 0
Hi, were you able to compile the driver? If so, did this solution help you?
2 years 3 months ago #78844
The topic has been locked.
I don't think with recent kernels you need to compile this anymore.
2 years 3 months ago #78851
The topic has been locked.
Time to create page: 0.474 seconds