×

INDI Library v1.9.6 Released (21 May 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

Ekos Polar Alignment problem

  • Posts: 106
  • Thank you received: 17
I used to be limited to 30s images before i added guider quite recently. I used to take 10 images of 30s and then force alignment via scheduler to correct for drift.
Join the SGL forum stargazerslounge.com/
The following user(s) said Thank You: matia belvederi
5 months 2 weeks ago #78495

Please Log in or Create an account to join the conversation.

  • Posts: 13
  • Thank you received: 0
but do you mean that if I add a guider I could be able to follow stars and shot more than 30sec even without a good polar alignment?? 
and sorry again but what do you mean with "force alignment via scheduler to correct for drift"..? 
ok I'm going to join sgl, do you suggest me to submit this my existencial problem on this forum?
5 months 2 weeks ago #78496

Please Log in or Create an account to join the conversation.

  • Posts: 106
  • Thank you received: 17
There is no shortcut to compensate for poor polar alignment as the mount needs to work harder to correct every slew both in RA & DEC. Whereas with good PA RA movement will be good.
I create a sequence in Capture tab which has 10 subs and save it.
In Scheduler there are tick boxes for Align, Focus, Guide and Track. I tick Track and align and load the sequence I previously saved. I set the Repeat for to say 10 which gives 100 subs. So what the scheduler does is before starting each sequence (10 subs) it does an align. So in simple terms...
- Align & Track, capture 10, Align & track, capture 10,.............
So in the course of 10 images if your object has drifted from centre its brought to centre again before starting next set of 10.
SGL has a lot of folk from UK & Europe so it never hurts to ask there.
The following user(s) said Thank You: matia belvederi
5 months 2 weeks ago #78497

Please Log in or Create an account to join the conversation.

  • Posts: 13
  • Thank you received: 0
wonderfull I'll try!
but first off all I'm going to install virtual windows (I'm trying to uso ekos on my mac) to verify that the problem persist or if ekos works well on windows.. I hope so!
ok AstroMuni I don't want to let you loose more time, I think now this is a challenge that I can win only with my own! 
thank you
5 months 2 weeks ago #78498

Please Log in or Create an account to join the conversation.

  • Posts: 106
  • Thank you received: 17
Ekos needs Linux to run INDI server :-(
5 months 2 weeks ago #78499

Please Log in or Create an account to join the conversation.

  • Posts: 13
  • Thank you received: 0
so can't I use it on windows? 
5 months 2 weeks ago #78500

Please Log in or Create an account to join the conversation.

  • Posts: 13
  • Thank you received: 0
can I use it on my mac with windows virtualized and the mount connected to a raspberry with astroberry? this was my first setup but it doesn't work so I decided to remove some hardware to understand what was the problem,,,, but I understand nothing at the moment 
5 months 2 weeks ago #78501

Please Log in or Create an account to join the conversation.

  • Posts: 106
  • Thank you received: 17
The Mac OS is linux under the covers, hence indi runs on it. Yes, you could certainly run on Windows and connect to RPi running the INDI server. I run Ekos on a linux machine but the INDI server is running on RPi.
Many folk just run everything off the RPi incl Ekos and just remote into it.
More details of my journey are here stargazerslounge.com/topic/375208-imaging-with-a-celestron-130/
The following user(s) said Thank You: matia belvederi
Last edit: 5 months 2 weeks ago by AstroMuni.
5 months 2 weeks ago #78502

Please Log in or Create an account to join the conversation.

  • Posts: 13
  • Thank you received: 0
ok so I'll try to do the same thing but with different setup, with raspberry and with windows on my mac
let's try and see if the problem is the same... but somthing makes me think there are other different problems around the corner 
let's try!
thank you AstroMuni, I'll inform you about my success or about the selling of my equipment! 
5 months 2 weeks ago #78503

Please Log in or Create an account to join the conversation.

  • Posts: 1220
  • Thank you received: 212

Replied by Andrew on topic Ekos Polar Alignment problem

I had a bit of an issue one night with the polar alignment tool, and I found it was because the telescope information I entered was not saving or being applied correctly until I filled in a name for the configuration.
This information is entered on the Mount tab of EKOS. Enter the correct telescope focal lengths, Fill in the configuration name, and hit the Save Telescope Info button.
That will fill in the relevant details within the INDI driver itself. You should then save the INDI mount driver configuration from the INDI control window.
So try that. Save telescope configuration with a name and then run the Polar Align Assistant.
INDI/KStars on Raspberry Pi 4, 4gb
Raspbian Buster with AstroPi3 script configuration
Skywatcher HEQ5 Pro Mount
Canon 600D Camera
Orion SSAG/ASI120mm @280mm Guide Scope
PHD2
Waveshare Stepper Motor Board - DIY Focuser
Adafruit GPS Module
Generic Bluetooth Joystick.
Startech 7 port powered USB Hub.
4 months 3 weeks ago #78969

Please Log in or Create an account to join the conversation.

It is really best practice to select the scope information in the equipment profile itself, and try to avoid to use the Mount tab to set them. That was there before we introduced the scopes in the equipment profile, so it might get removed at any time.
Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info
4 months 3 weeks ago #78976

Please Log in or Create an account to join the conversation.

  • Posts: 1220
  • Thank you received: 212

Replied by Andrew on topic Ekos Polar Alignment problem

I don't quite follow. "Equipment Profile" could mean a few locations in KStars where I can enter telescope information. But as far as I was aware, I only found information entered in the mount tab or directly within the INDI driver itself populated the scope choices available in the align module. Is this something very new, or do you mean Telescope Selection in the Profile Editor? I didn't notice the telescope selection in the profile editor doing anything.
INDI/KStars on Raspberry Pi 4, 4gb
Raspbian Buster with AstroPi3 script configuration
Skywatcher HEQ5 Pro Mount
Canon 600D Camera
Orion SSAG/ASI120mm @280mm Guide Scope
PHD2
Waveshare Stepper Motor Board - DIY Focuser
Adafruit GPS Module
Generic Bluetooth Joystick.
Startech 7 port powered USB Hub.
Last edit: 4 months 3 weeks ago by Andrew.
4 months 3 weeks ago #78977

Please Log in or Create an account to join the conversation.

Time to create page: 1.068 seconds