×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Joystick input stops tracking

  • Posts: 28
  • Thank you received: 1

I tried to build and have the same error.


Travis
5 years 10 months ago #26139

Please Log in or Create an account to join the conversation.

You need to compile and install libindi first.
5 years 10 months ago #26144

Please Log in or Create an account to join the conversation.

  • Posts: 1309
  • Thank you received: 226
I built and installed libindi, But now INDI drivers and KStars crashes.
The following user(s) said Thank You: Travis
5 years 10 months ago #26161

Please Log in or Create an account to join the conversation.

  • Posts: 28
  • Thank you received: 1
Some info that I hope is helpful.
After looking some more I noticed that in Indi control panel the driver info on Astroberry shows 0.3 and on Astropi3 it shows 0.4, for EQMod.
Astroberry does not strop tracking with joystick input. So this was working in 0.3.


Travis
5 years 10 months ago #26200

Please Log in or Create an account to join the conversation.

  • Posts: 1309
  • Thank you received: 226
It definitely was working previously. I wonder if it is related to the patch that helped with the random disconnects. The timeframe is about right.
The following user(s) said Thank You: Travis
5 years 10 months ago #26202

Please Log in or Create an account to join the conversation.

I just tested it locally here and it's definitely working flawlessly with PS4 gamepad.
5 years 10 months ago #26210

Please Log in or Create an account to join the conversation.

  • Posts: 1309
  • Thank you received: 226
Excellent. I couldn't install it properly myself to test unfortunately, will it be released soon?
5 years 10 months ago #26212

Please Log in or Create an account to join the conversation.

  • Posts: 472
  • Thank you received: 165
One thing to notice is that there is backlash also in the RA axis so tracking might not be immediately visible after slewing east until all the gears come into contact again.
5 years 10 months ago #26214

Please Log in or Create an account to join the conversation.

  • Posts: 28
  • Thank you received: 1

I had to figure out how but I built libindi and then Eqmod and joystick control is now working.
Thank you!

Now, how do I get back to the production build once this is incorporated?


Travis
5 years 10 months ago #26215

Please Log in or Create an account to join the conversation.

  • Posts: 2
  • Thank you received: 0
Just installed v1.7.2 for Raspberry and found that the fix for EQmod (resuming tracking after joystick input) is not in there yet.

Since i'm not experienced in rebuilding indilib and eqmod; when will this fix be in the daily build?
And if that takes a long time; where can i find instructions on how to rebuild EQMod with the fix?

Thanks in advance!
5 years 9 months ago #26308

Please Log in or Create an account to join the conversation.

  • Posts: 28
  • Thank you received: 1

See number 3 here.
indilib.org/forum/general/210-howto-buil...st-libindi-ekos.html

Use the same process to clone Eqmod and build it from source from GitHub.


Travis
5 years 9 months ago #26314

Please Log in or Create an account to join the conversation.

  • Posts: 2
  • Thank you received: 0
Thanks Travis!
5 years 9 months ago #26315

Please Log in or Create an account to join the conversation.

Time to create page: 0.746 seconds