×

INDI Library v1.7.8 Released (11 May 2019)

Mid year release of INDI Library v1.7.8 comes with a few drivers and improvements to to existing drivers.

[SOLVED] infinite looping with 2 ZWO cameras

  • Posts: 26
  • Thank you received: 2

infinite looping with 2 ZWO cameras was created by adonf

With a setup consisting of an ASI1600 main camera and an ASI178 secondary camera, no way to achieve more than thirty poses without arriving at an infinite loop of a given pose.
A stop, then immediate recovery causes a new looping from the first pose.

However, if I stop the ASI178, and I restart my series, then I see no problem.

This is obviously related to the cohabitation between the 2 cameras ZWO.
Indeed with a setup consisting of an SX694 and the ASI178 I have no problem.
Same with the ASI1600 alone without the ASI178.
8 months 1 week ago #30208
The topic has been locked.
  • Posts: 71
  • Thank you received: 17

Replied by DerPit on topic infinite looping with 2 ZWO cameras

Have you limited the USB bandwidth? Had troubles, too, when using 1600MM photo + 120MM guide....
What's a pose?
openSUSE Tumbleweed KStars git INDI git
GPDX+EQMOD, CEM60EC, ASI1600+EFW+ASI290 mini
8 months 1 week ago #30248
The topic has been locked.

Replied by knro on topic infinite looping with 2 ZWO cameras

The nightly KStars release _might_ help if you're willing to give it a go
Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info
8 months 1 week ago #30268
The topic has been locked.
  • Posts: 26
  • Thank you received: 2

Replied by adonf on topic infinite looping with 2 ZWO cameras

Sorry for the bad translation, I meant "capture" or "frame".

I have just collected the images of this night, and all have passed without problem :)
The only difference: I gave an old USB cable.
I had indeed changed both camera and USB cable. It is obviously my USB cable which is defective.

The incident is closed.
The following user(s) said Thank You: knro
8 months 1 week ago #30303
The topic has been locked.
Time to create page: 0.557 seconds