Hello Everyone,

Any one else had a chance to try KStars/Ekos with the new Fedora 29 release? I upgraded shortly after it was released and got a clear night this past Saturday. Well, I didn't get far -- Could not get guiding to calibrate.

Now, I had been using PHD2 due to the QHY5 loop/stop driver hang in Ekos. The problem manifests itself as a time out largely during RA reverse. Many attempts to diagnose the issue with PHD2, I tried Ekos/Internal with the QHY5 driver -- same thing.

So, I turned to the simulators. I did not expect it, but I can reproduce this issue using nothing but the simulators.

Here is my latest attempt with the simulators (Guider: CCD Simulator Guider, Via: CCD Simulator):

---

2018-11-05T14:23:38 GUIDE_RA: Scope cannot reach the start point after 35 iterations. Possible mount or backlash problems...
2018-11-05T14:21:33 RA drifting reverse...
2018-11-05T14:21:16 RA drifting forward...
2018-11-05T14:21:16 Calibration started.
2018-11-05T14:21:16 Auto star selected.


Installed Software

---

libindi-bleeding-1.7.5-20.3.x86_64
indi-qhy-bleeding-1.7.5-22.3.x86_64
lupinix-indi-bleeding-1.0-198.6.noarch
kstars-bleeding-3.0.0-19.6.x86_64
indi-asi-bleeding-1.7.5-22.3.x86_64


I would be real curious to know if any others out there can reproduce this with other Fedora 29 installs.