´╗┐
×

INDI Library v1.8.0 is Released (27 Jul 2019)

INDI Library v1.8.0 is mostly a maintenance release to fix a few bugs in several drivers.

Scheduler: start and end time issue after meridian flip

  • Posts: 934
  • Karma: 6
  • Thank you received: 239

Scheduler: start and end time issue after meridian flip was created by wvreeven

I am using the scheduler tonight to take images of NGC 2403. Before the meridian flip the estimated end time looked OK. However, after the meridian flip, the start time still is the original start time, which I guess is OK, but the end time is way off. I include two screen shots: one of the scheduler screen and one of the sequence queue screen. As you can see by the sequence about 1h 20m remain but the sequencer states an estimated duration of only 7 minutes.


Cheers, Wouter



ASI1600MM-Pro Cooled and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro

ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chr├ętien on a SkyWatcher EQ6-R
7 months 2 weeks ago #33347
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 728
  • Karma: 13
  • Thank you received: 229

Replied by TallFurryMan on topic Re:Scheduler: start and end time issue after meridian flip

Thanks for reporting! I'll have a look at this weirdness. I have to check the light frame flag in the same context.

-Eric
HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access
The following user(s) said Thank You: wvreeven
Last edit: 7 months 2 weeks ago by TallFurryMan.
7 months 2 weeks ago #33356

Please Log in or Create an account to join the conversation.

Time to create page: 0.326 seconds