×

INDI Library v1.7.6 Released. (27 Feb 2019)

First release of 2019 comes with quite a few new drivers across the board along with significant performance improvements to INDI camera and live streaming performance. Many drivers received significant updates to improve performance & stability, while a few were re-written from scratch to be in line with INDI standards. Here are some of the highlights:

[IGNORE] Alignment issue: wrong coordinates

  • Posts: 141
  • Karma: 2
  • Thank you received: 36

[IGNORE] Alignment issue: wrong coordinates was created by kengs

Edit: My mistake -getting old. I need to have ANSVR set to J2000 like nova.astrometry.net
Same problem I had a few months ago. But I've been playing with ANSVR and changed the settings.
By the way: It is now possible to install astrometry.net under WSLand set up ANSVR to run that instead.

Running Kstars/Ekos 3.0.0 on Windows 10 x64.
Last night got a bad alignment. I was aligning on NGC2775 but after alignment I was off by about 15 arcmin in RA and NGC2775 was on the edge of the FOV.
I've had something similar before and it was due to Ansvr being set to J2000 instead of JNow. So I checked that it was set correctly.
I've attached the Kstars log and the Ansvr log. The problem is apparent at 21:22:20 (line 20718 of Kstars log and line 1662 of Ansvr)
Target Ra/Dec in JNOW is 9h 11m 21s RA, 6d 57m 33s Dec or in decimal degrees 137.8375, 6.95916666666667
Ansvr returns JNOW solver result of 137.585347251, 7.038789885
Near enough to dec 0 so I make that approx 16 arcmin
Ekos confirms the solver coords on line 20718 but on line 20719 reports them as RA 09h 11m 21s DEC 06d 57m 33s and determines that is within the acceptable range. It looks like Ekos is treating the Jnow coordinates as J2000
Is there a setting somewhere I've changed by mistake?

File Attachment:

File Name: log_21-03-26.zip
File Size:593 KB

File Attachment:

File Name: ansvr_2019...4945.log
File Size:101 KB
Ubuntu 16.04 AMD64 VM, RPi3 Ubuntu Mate 16.04, Windows 10 AMD64, Ubuntu 16.04 AAEON UP Core
Avalon M-Uno, EQ6 Pro, Atik420, ASI1600MM-C, ASI120MM-S, DBK21AU04, ZWO EFW, Optec TCFSi
Vixen R150S, GSO RC8, ST80
Last edit: 2 months 2 weeks ago by kengs.
2 months 2 weeks ago #34780
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.219 seconds