×

INDI Library v1.7.6 Released. (27 Feb 2019)

First release of 2019 comes with quite a few new drivers across the board along with significant performance improvements to INDI camera and live streaming performance. Many drivers received significant updates to improve performance & stability, while a few were re-written from scratch to be in line with INDI standards. Here are some of the highlights:

configure equipement in EKOS

  • Posts: 18
  • Thank you received: 2

configure equipement in EKOS was created by seescho

I have some questions about "configure equipement" in EKOS. See this screenshot: seescho.files.wordpress.com/2019/04/ksta...igure-equipement.jpg

1. If I delete all the equipement, I´ve added to configure equipement, the ID is not resettet. The next piece, I add, will get the next ID, in my case here 8 and not 1, how I expected. How can I reset the ID to 1?
2. What advantage has it to add all the equipement here, if I use EKOS?
3. What does kstars do with the information in the driver-field? My driver is indi-eqmod-telescope, but I set this driver in the profile-manager in EKOS. Must I set it here, too?
1 week 5 days ago #37466

Please Log in or Create an account to join the conversation.

  • Posts: 349
  • Thank you received: 47

Replied by AstroNerd on topic configure equipement in EKOS

seescho wrote: I have some questions about "configure equipement" in EKOS. See this screenshot: seescho.files.wordpress.com/2019/04/ksta...igure-equipement.jpg

1. If I delete all the equipement, I´ve added to configure equipement, the ID is not resettet. The next piece, I add, will get the next ID, in my case here 8 and not 1, how I expected. How can I reset the ID to 1?
2. What advantage has it to add all the equipement here, if I use EKOS?
3. What does kstars do with the information in the driver-field? My driver is indi-eqmod-telescope, but I set this driver in the profile-manager in EKOS. Must I set it here, too?


I only configure my equipment in ekos, I don’t use the other in Kstars....not sure what that is for to be honest.. :)
Stellarmate OS on Raspberry pi3b+ controlled with Kubuntu laptop
NEQ6 Pro, belt modded & tuned
Meade series 5000 80mm triplet Apo & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar Guide Camera
Pegasus Ultimate Hub for all USB & Power
Pegasus focus motors on both scopes
The following user(s) said Thank You: seescho
1 week 5 days ago #37471

Please Log in or Create an account to join the conversation.

  • Posts: 493
  • Karma: 1
  • Thank you received: 85

Replied by Ihoujin on topic configure equipement in EKOS

I think other features such as What's up tonight and observation logs use this information.
INDI/KStars on Raspberry Pi 3B+
Lubuntu 16.04
Skywatcher HEQ5 Pro Mount
Canon 600D Camera
Orion SSAG @280mm Guide Scope
PHD2
Adafruit Motor Hat shield
Adafruit GPS Module
Generic Bluetooth Joystick.
Startech 7 port powered USB Hub.
The following user(s) said Thank You: AstroNerd, seescho
1 week 4 days ago #37473

Please Log in or Create an account to join the conversation.

  • Posts: 18
  • Thank you received: 2

Replied by seescho on topic configure equipement in EKOS

Thanks for the information
1 week 2 days ago #37574

Please Log in or Create an account to join the conversation.

Time to create page: 0.190 seconds