×
INDI Library v1.8.5 Released (19 Apr 2020)

April 2020 release of INDI Library v1.8.5 introduces new drivers while providing fixes and improvements to existing devices and core framework.

Job sequencer / auto guide problems

1 year 1 month ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 550
Karma: 6
More
Job sequencer / auto guide problems #39611
I think I found an explanation what happens. It seems like the internal guider recovers itself after the slew and starts guiding faster than the scheduler:
[2019-05-27T11:56:47.763 PDT INFO ][ org.kde.kstars.ekos.scheduler] - "Job 'NGC884-Part4' repositioning is complete."
...
[2019-05-27T11:56:48.764 PDT INFO ][     org.kde.kstars.ekos.guide] - "Autoguiding started."
[2019-05-27T11:56:48.772 PDT DEBG ][     org.kde.kstars.ekos.guide] - Capturing frame...
[2019-05-27T11:56:48.773 PDT INFO ][ org.kde.kstars.ekos.scheduler] - "Starting guiding procedure for NGC884-Part4 ..."
[2019-05-27T11:56:48.773 PDT DEBG ][ org.kde.kstars.ekos.scheduler] - Guide State "Guiding"
[2019-05-27T11:56:48.773 PDT DEBG ][ org.kde.kstars.ekos.scheduler] - Calibration & Guide stage...
[2019-05-27T11:56:48.773 PDT INFO ][ org.kde.kstars.ekos.scheduler] - "Job 'NGC884-Part4' guiding is in progress."

And here in comparison a sequence from my log file where everything works fine:
[2019-05-26T23:10:41.643 CEST INFO ][ org.kde.kstars.ekos.scheduler] - "Starting guiding procedure for M 64 ..."
[2019-05-26T23:10:41.691 CEST INFO ][     org.kde.kstars.ekos.guide] - "PHD2: Lock Position Lost."
[2019-05-26T23:10:44.359 CEST INFO ][     org.kde.kstars.ekos.guide] - "PHD2: Lock Position Set."
[2019-05-26T23:10:44.378 CEST INFO ][     org.kde.kstars.ekos.guide] - "PHD2: Star Selected."
[2019-05-26T23:10:49.377 CEST INFO ][     org.kde.kstars.ekos.guide] - "PHD2: Lock Position Set."
[2019-05-26T23:10:49.408 CEST INFO ][     org.kde.kstars.ekos.guide] - "PHD2: Guiding Started."
[2019-05-26T23:10:49.418 CEST INFO ][     org.kde.kstars.ekos.guide] - "Autoguiding started."
[2019-05-26T23:10:49.465 CEST INFO ][ org.kde.kstars.ekos.scheduler] - "Job 'M 64' guiding is in progress."
Does anybody have experience with the internal guider?

- Wolfgang

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

1 year 1 month ago
knro
Administrator
Administrator
Posts: 8087
Karma: 51
Job sequencer / auto guide problems #39636
The issue was in the scheduler. I fixed it in this commit .

Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info

Please Log in or Create an account to join the conversation.

1 year 1 month ago
Viejo
Junior Boarder
Junior Boarder
Posts: 23
More
Topic Author
Job sequencer / auto guide problems #39652
This is great. Thank you.

I don't know how to work with the Git link you provided. How long before it makes the nightly release if it's not there already? And how can we know when this or any other fix moves from nightly to stable?

AT8RC Astrograph on CGX mount
ASI-071 C camera or
Pentax K3ii DSLR
60mm Orion guide scope w/QHY5II camera
Feather Touch 2" focuser w/ Focus Lynx auto focus
PPB Power Center, GPS, Temp/Humidity Sensor
7 port powered USB hub to HP Laptop over 30' powered USB cable
KStars / EKOS

Please Log in or Create an account to join the conversation.

1 year 1 month ago
knro
Administrator
Administrator
Posts: 8087
Karma: 51
Job sequencer / auto guide problems #39677
It's in nightly already and is in stable with today's v3.2.3 release... but we didn't officially announce v3.2.3 since we have issues with the Windows build so hopefully tomorrow we'll announce it.

Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info

Please Log in or Create an account to join the conversation.

1 year 1 month ago
Viejo
Junior Boarder
Junior Boarder
Posts: 23
More
Topic Author
Job sequencer / auto guide problems #39728
Using both the nightly (2019-05-30 13:10:05) and stable (2019-05-30 9:48:47) I have the same problems - no change in behavior. Guiding fails to re-calibrate on mosaic panel changes and focus is not called on either panel changes or meridian flip. Log attached...

AT8RC Astrograph on CGX mount
ASI-071 C camera or
Pentax K3ii DSLR
60mm Orion guide scope w/QHY5II camera
Feather Touch 2" focuser w/ Focus Lynx auto focus
PPB Power Center, GPS, Temp/Humidity Sensor
7 port powered USB hub to HP Laptop over 30' powered USB cable
KStars / EKOS
Attachments:

Please Log in or Create an account to join the conversation.

1 year 1 month ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 550
Karma: 6
More
Job sequencer / auto guide problems #39731
Hi Viejo,
I did a similar test. For me it seems this looks like a problem with the internal guider. After slewing it seems like it does not select a new star. But I am neither really familiar with the internal guider nor do I really have experience with the guiding simulator.

I will do a check with PHD2 with simulators so that I can help you setting it up.

Wolfgang

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

1 year 1 month ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 550
Karma: 6
More
Job sequencer / auto guide problems #39778
Hi Viejo,
it seems like I stepped into a similar problem this night. I had the scope already positioned to the target and PHD2 guiding was running. When I started the schedule with this target, the mount did only slew a tiny bit leaving PHD2 guiding - but interestingly it slewed enough so that there was no star any more. PHD2 reported "star lost", but did not terminate or restart the guiding.

Anyway, it seems like - in some situations at least - slewing does not automatically terminate guiding. I'll take a closer look...

- Wolfgang

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

11 months 3 weeks ago
Viejo
Junior Boarder
Junior Boarder
Posts: 23
More
Topic Author
Job sequencer / auto guide problems #40907
This was reported fixed a month ago but it's not fixed. The problem isn't just with the mosaic jobs. The only time the scheduler behaves correctly is when it detects a change in pier side, a crossing of the meridian. I set up a job sequence with 2 objects on the rising side of the meridian, then 2 on the setting side and then 2 more on the rising side. When switching to a job on the same side of the meridian, it behaves as if it still has the guide star when in fact it's many degrees away. Switching to a job on the opposite side, it recognizes the need to recalibrate and behaves correctly.

It should be a simple fix to have it set the recalibrate flag when it detects any SLEW, not just a meridian change.

Attached is a log. I edited out a bunch of focuser commands that are irrelevant.

AT8RC Astrograph on CGX mount
ASI-071 C camera or
Pentax K3ii DSLR
60mm Orion guide scope w/QHY5II camera
Feather Touch 2" focuser w/ Focus Lynx auto focus
PPB Power Center, GPS, Temp/Humidity Sensor
7 port powered USB hub to HP Laptop over 30' powered USB cable
KStars / EKOS
Attachments:

Please Log in or Create an account to join the conversation.

11 months 3 weeks ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 550
Karma: 6
More
Job sequencer / auto guide problems #40998
Is PHD2 configured to abort when the mount moves? This needs to be configured, kstars does not abort guiding when slewing. If you are not using pulse guiding, it might be the case that you need to set your mount as aux mount in PHD2 so that it recognizes slewing.

Wolfgang

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

11 months 3 weeks ago
Viejo
Junior Boarder
Junior Boarder
Posts: 23
More
Topic Author
Job sequencer / auto guide problems #41013
"...kstars does not abort guiding when slewing."

YES! That's exactly my point. It should, it's broken and it should be a rather trivial problem to fix.

AT8RC Astrograph on CGX mount
ASI-071 C camera or
Pentax K3ii DSLR
60mm Orion guide scope w/QHY5II camera
Feather Touch 2" focuser w/ Focus Lynx auto focus
PPB Power Center, GPS, Temp/Humidity Sensor
7 port powered USB hub to HP Laptop over 30' powered USB cable
KStars / EKOS

Please Log in or Create an account to join the conversation.

11 months 3 weeks ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 550
Karma: 6
More
Job sequencer / auto guide problems #41014
Feel free to submit a patch - helping hands always appreciated.

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

11 months 3 weeks ago
TallFurryMan
Platinum Boarder
Platinum Boarder
Posts: 890
Karma: 13
More
Job sequencer / auto guide problems #41028
There are probably two things that need fixing in the context of guiding:
- Proper stop of the Guide module when moving the mount (slewing, flipping, aligning...). As mentioned PHD2 is supposed to detect the movement and stop guiding by itself, but that is only a safeguard.
- Proper calibration reset of PHD2 when the Ekos option requiring to clear when starting a new job is set.

-Eric

HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access

Please Log in or Create an account to join the conversation.

Time to create page: 0.299 seconds