I forgot to log, but the SkyWatcher AltAz driver did not work with the new version.
(Connected via a direct cable.)

There is no problem with the connection, but it can not be operated from Ekos's mount controller, nor can Slew.

The same was true with the EQMod driver.

It works when you change to an older version of the image.

Since the driver itself does not seem to change, updating Ekos may be a problem.

well, then attach the log when you can.

I'm sorry
I immediately wanted to use it, so I went back to the old version that worked.
Raspberry pie 3 × 2 (Astroberry, Tiny Astro)
Nanopi M4
None of them worked well.

The mount is the Skywatcher Virtuoso (Alt / Az) used by EAA.

If see the same symptoms when upgrading any of the above machines,I send attach a log.

you forgot to attach

I upgraded one of the two raspberry Pis 3 again.

After connection, a display of mount crash is displayed, neither the control panel of the driver nor the Ekos mount controller is stopped, and functions such as operation and through by the controller do not function.

Please check the attached log.

Thank you in advance.

I also tried the EQMod driver, this driver does not work.

This also attaches a log.

Ubuntu version is 16.04.

It worked correctly (1.8.0) by the driver version upgrade.

Thank you very much.